Jump to content
C4 Forums | Control4

alanchow

Supporter
 View Profile  See their activity

  • Posts

    4,350

  • Joined

  • Last visited

  • Days Won

    222

 Content Type 

Everything posted by alanchow

  1. alanchow
    Its old. So old that in fact its using an email address that i had which predates Chowmain Software & Apps. So i would say its 4 years old at minimum.
  2. alanchow
    You should probably reach out to Bond for support. They also have a forum if you would rather post to the community rather than lodge a ticket. https://forum.bondhome.io/
  3. alanchow
  4. alanchow
    For those who are not familiar with the TP-Link KL430 strip. This is a 2 meter wifi controlled RGBW LED strip that is extendable upto 10 meters and provides control over brightness, hue (color), saturation, color temperature and lastly effects (this is pre-defined by TP-Link and utilise the different color zones and segments to do pretty cool stuff). https://www.kasasmart.com/us/products/smart-lighting/kasa-smart-led-light-strip-kl430
  5. alanchow
    This has now been integrated now. Was a bit of a pain but got everything integrated. Note this is a new driver in the suite and effects must be executed in via a programming command (it was either that or add in 18 light proxies which after an internal office vote decided it would clutter navigator).
  6. alanchow
    Control4’s SR-250 and SR-260 remotes do not offer press/release functionality for select. As such we provided a command that can be mapped to other buttons.
  7. alanchow
    There are multiple methods of implementing licencing with drivers. All of which is tied into a unique identifier. In most cases the identifier is the mac address of the Control4 controller though there have been times where it has been tied into the mac address or serial number of the device being controlled. Licencing can use a hard coded algorithm (where you will need to create a generator for you where you input the unique idenifier) or can be dynamic via a licencing service. There are multiple online marketplaces which sell Control4 drivers. The one we utilise is called driverCentral (http://www.driverCentral.io).
  8. alanchow
    7 year old driver? Sounds like it’s not our Kodi Full driver considering we release it in 2015.
  9. alanchow
    Its direct.
  10. alanchow
    Sorry I do not.
  11. alanchow
    Some people were complaining about how the fan comes up under lighting. Unfortunately this is a Control4 problem which we can't resolve. Instead what we have done is create a experience button which allows you to select any fan proxy and allow for 3 speed fan control with feedback. It will auto map the speeds based on capabilties of the fan proxy driver selected. Mapping will be lowest (1), highest (depending on capabilities) and will the following math for the medium speed (highest / 2 rounded up). It is a free driver and is bundled with this driver.
  12. alanchow
    Some people were complaining about how the fan comes up under lighting. Unfortunately this is a Control4 problem which we can't resolve. Instead what we have done is create a experience button which allows you to select any fan proxy and allow for 3 speed fan control with feedback. It will auto map the speeds based on capabilties of the fan proxy driver selected. Mapping will be lowest (1), highest (depending on capabilities) and will the following math for the medium speed (highest / 2 rounded up). It is a free driver and is bundled with this driver.
  13. alanchow
    Some people were complaining about how the fan comes up under lighting. Unfortunately this is a Control4 problem which we can't resolve. Instead what we have done is create a experience button which allows you to select any fan proxy and allow for 3 speed fan control with feedback. It will auto map the speeds based on capabilties of the fan proxy driver selected. Mapping will be lowest (1), highest (depending on capabilities) and will the following math for the medium speed (highest / 2 rounded up). It is a free driver and is bundled with this driver.
  14. alanchow
    https://chowmain.squarespace.com/benq-control4
  15. alanchow
    Please reach out to our support desk either via phone or ticket and we will assist with troubleshooting. Currently our driver only supports direct camera connection. Cameras that are connected to the NVR are on a different network. As such they are not currently supported. We are in the process of integrating the NVR along with cameras through the NVR. This will arrive early in the new year.
  16. alanchow
    You need to get a proper driver written as the generic tcp driver wasnt designed to do what you want to do.
  17. alanchow
    Version #20191223 - 23-DEC-2019 Improved rediscovery of light bulbs if no response. Fixed issue with HS110(US). For some reason US versions utilise watts (POWER) where international is Milliwatts (POWER_MW)
  18. alanchow
    I tested my HS110 here again and it works. Could be a difference between AU and US versions of the outlet. Will order a US one from amazon and confirm.
  19. alanchow
    For those wondering why this has been removed it is due to compliance with California’s loT Security Law SB327
  20. alanchow
    That is correct. The driver downloads the snapshot and sends it to Control4 for it to forward to your phone. As mentioned Control4 requires 4sight for remote access to the home and for push notifications. If you do not have a 4sight subcription you will need to get this added to your system for it to work.
  21. alanchow
    This requires 4sight. If you can remotely access Control4 then it will work.
  22. alanchow
    We don't have a DVR but i'm assuming its much the same as the NVR. Much of the features we have implemented in the camera will be on the NVR (though through a different API).
  23. alanchow
    Pushed an update out. Changelog for the past week below Version #20191216 - 16-DEC-2019 Fixed energy for HS110 on new protocol. Fixed energy for HS300 due to incorrect resetting of min/max readings. Fixed discovery of HS220 Fixed toggle for HS220 Fixed toggle for Bulbs Version #20191213 - 13-DEC-2019 Fixed energy variables for HS300 Updated HS220 to new protocol that the other drivers use. Added HS200 driver so its easier to program rather than adding in HS1XX driver with the outlet light driver. Added property to enable/disable auto hiding of proxies for light bulbs Fixed issue affecting feedback introduced by version 20191211 for bulb drivers Fixed advanced lighting scenes for HS220 not dimming correctly. Version #20191211 - 11-DEC-2019 Updated HS1XX and Bulb driver to new protocol that the other drivers use.
  24. alanchow
    Sounds like there is big demand for various cameras. We will see what we can do to fill the voids. we have relationships with all the major camera manufacturers and a lot of them are already either contracting us to develop drivers or giving us equipment so we can develop licences drivers.
  25. alanchow
    This one is done by Justin. He is the one handling all camera integration at Chowmain. Never the less he has done a fantastic job at making this and we will be continuously adding to this (with the next stage being NVR support).
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept