smarch Posted November 28, 2011 Share Posted November 28, 2011 Ok, this may have been answered a few times, but I couldn't find anything directly relating.So my HC 300 c, just happens to be very close to the transformer for my doorbell. It's a standard lighted doorbell with a front and side buttons. Is there a way to connect this transformer with the HC300? I would like to either play an anouncement, or flash the lights etc. the programming part isnt the problem, my question is more to do with the actual wiring.Any thought are welcome.Cheers Link to comment Share on other sites More sharing options...
CFUG Posted November 28, 2011 Share Posted November 28, 2011 I haven't dome this but I would think that a 24VAC coil relay could be put inline to give you a set of dry contacts to use with the HC. Link to comment Share on other sites More sharing options...
thegreatheed Posted December 2, 2011 Share Posted December 2, 2011 ELK mades a doorbell relay module designed to do exactly this. Link to comment Share on other sites More sharing options...
TexasBill Posted December 2, 2011 Share Posted December 2, 2011 We simply have a doorbell switch that goes into the IO for Control 4 and then I play what ever door bell message/music/chime I want. You can get them free and easy off the internet. Currently we have the Jetsons doorbell that plays throughout the house when pushed. Link to comment Share on other sites More sharing options...
smarch Posted December 5, 2011 Author Share Posted December 5, 2011 Thanks for the replies.When you say you have a doorbell switch that goes into the IO for control 4, can you please elaborate on wiring? Specifically what wires go where? Off transformer?Thanks Link to comment Share on other sites More sharing options...
Keter8 Posted December 6, 2011 Share Posted December 6, 2011 Thanks for the replies.When you say you have a doorbell switch that goes into the IO for control 4, can you please elaborate on wiring? Specifically what wires go where? Off transformer?Thankshttp://www.c4forums.com/uploads.php?file=HC-300%20doorbell%20and%20trigger%20wiring.pdf Link to comment Share on other sites More sharing options...
TexasBill Posted December 9, 2011 Share Posted December 9, 2011 Thanks for the replies.When you say you have a doorbell switch that goes into the IO for control 4, can you please elaborate on wiring? Specifically what wires go where? Off transformer?ThanksNo transformer - there is simply the two wires from the doorbell switch that Control 4 senses a short and then when the relay is closed I play a sound. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.