grant0830 Posted October 10 Share Posted October 10 Hello, We recently moved into a new home and are trying to connect the DSC Neo panel to C4 through the TL280 5.1 internet alarm communication. I have gone through all the panel configuration set up steps on the C4 guide providing the installer with the Peer Key (first 8 digits on prompt 422) and the Own Key (all 8 digits on promos 423). I have also confirmed all the settings for IP communication prompts on the C4 configuration guide, however we still can not get ip communication to the director. Any help or tips/tricks would be much appreciated! Thank you all in advance! Grant Quote Link to comment Share on other sites More sharing options...
grant0830 Posted October 11 Author Share Posted October 11 I have gone through the TL-280 DSC set up on the driver multiple times. The TL-280 is version 5.51 and the following has been completed and verified multiple times. 422: first 8 digits peer key entered in driver 423: changed from default 12345678 to unique 8 digit own key 425: --3-5--- 426: --3----- 428: IP address of director programed into panel 429: 0C00 711: changed from default 0000 to 0078 992: IP address noted from TL-280 (however if I look on my uniFi network the DSC IP address is showing up a model "xbox" and manufacture "Microsoft" and has its IP address fixed. 999: unpluged the Ethernet cable, entered 55 over the 99 default and waited 5 second and hit # then plugged back in the network cable. Still no connectivity from the director to the DSC Neo through the TL-280? Im at a loss Quote Link to comment Share on other sites More sharing options...
Control4Savant Posted October 12 Share Posted October 12 Are you using Alarm.com? Quote Link to comment Share on other sites More sharing options...
grant0830 Posted Saturday at 03:45 PM Author Share Posted Saturday at 03:45 PM No, The original installer of the DSC system tried to push that but we want to self monitor through control4 and 4sight Quote Link to comment Share on other sites More sharing options...
ejn1 Posted Saturday at 06:45 PM Share Posted Saturday at 06:45 PM You may have an IP conflict on that address. Have you tried another IP? Quote Link to comment Share on other sites More sharing options...
grant0830 Posted Monday at 12:31 PM Author Share Posted Monday at 12:31 PM Im not sure how to change the IP on the DSC TL-280. I went into my UniFi network and see that the DSC has a fixed IP address and is using RSTP spanning tree protocol.Rogue DHCP Server Detection is selected, and IoT Auto-Discovery is also selected. There is no data transfer showing up or down but the latency is showing 1ms. Quote Link to comment Share on other sites More sharing options...
grant0830 Posted 15 hours ago Author Share Posted 15 hours ago Well, this was the strangest control4 issue I have ran into in 15 years of using the platform. The remote installer switched the driver connection to serial (which didn't work when programing the DSC panel to serial and connecting the TL-280 via serial), so then I reprogramed the DSC back to IP and the remote installer switched the connection back to IP on the driver and now its working.... who knows Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.