JPK72 Posted Wednesday at 08:36 PM Share Posted Wednesday at 08:36 PM Hi, in my living room setup I am using a denon x4800h. I wanted to be able to have the TV sound in the other rooms as well so my dealer hooked to the Denon Zone 2 stereo output to the triad audio matrix input. When I hit (+) in the living room and choose a different room the zone2 output is correctly connected to the matrix. BUT. I recently discovered that in the Denon the zone2 is always turned on likely by C4 whenever I turn on the living room av setup or change the source (from TV to my shield or vice versa). Even if no other room is selected as output. This is a severe problem since the denon will not support things like atmos anymore in zone1 once zone2 is on. Do you guys have any clue what might be misconfigured in the bindings/driver that triggers the always on of zone2? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.