Mitsubishi Kumo Integration

[Kent Rowley]

So, I have a client that has installed a bunch of Mitsubishi Mini splits throughout their home and they are using the Mitsubishi Kumo app to control them.  Is there something in development by 3rd parties to possibly integrate this into C4?

 

Chowmain had something going with their Intesisbox for Control4 driver, but it is no longer available.

 

Any help on how to integrate these would be greatly appreciated!!

 

Thank you!

[alanchow]

10 hours ago, Kent Rowley said:

So, I have a client that has installed a bunch of Mitsubishi Mini splits throughout their home and they are using the Mitsubishi Kumo app to control them.  Is there something in development by 3rd parties to possibly integrate this into C4?

 

Chowmain had something going with their Intesisbox for Control4 driver, but it is no longer available.

 

Any help on how to integrate these would be greatly appreciated!!

 

Thank you!

Kumo Cloud can be integrated into Control4 through Home Assistant using this custom component.

https://github.com/dlarrick/hass-kumo

Home Assistant driver here

https://chowmain.software/drivers/control4-home-assistant

Note IntesisBox for Control4 is still available though probably better off doing Kumo cloud integration via home assistant in this case.

Intesis driver here.

https://chowmain.software/drivers/control4-intesisbox

[nxr]

Try Airzone. Works perfectly on my five unit ducted Mitsubishi mini split system 

[Kent Rowley]

Alan, So I have been researching this further, and I am hoping you can assist me further on this.  I am not able to find anything in the Home Assistant Community Store for the Kumo drivers.  When I follow the link in the document to the HACS store install for Kumo, I get a bad page.  Also, when I do a manual search on the store, Kumo and Mitsubishi don't pull up any available results for download.  Did they remove it?  This is new to me so I apologize for my questions.

 

Thank you,

Kent