msgreenf Posted July 17 Share Posted July 17 v24 of the network driver is out and this fixes the disconnect issues we have been facing. Been testing it for a few weeks in my house and so far no disconnects@! BY96 and macosr 2 Quote Link to comment Share on other sites More sharing options...
ekohn00 Posted July 17 Share Posted July 17 3 hours ago, msgreenf said: v24 of the network driver is out and this fixes the disconnect issues we have been facing. Been testing it for a few weeks in my house and so far no disconnects@! What disconnect issue, everytime I try to find info on disconnects, there seems to be a lot of denials. Honestly this is a good thing. Out of curiosity, my pet peeve is using the driver will lock in the temp to what the driver wants unlike at the thermostat or using the ecobee app that would give choices of the changed TILL…. Any chance this too has been changed? Quote Link to comment Share on other sites More sharing options...
msgreenf Posted July 17 Author Share Posted July 17 Sorry I don't follow your 2nd part Quote Link to comment Share on other sites More sharing options...
ekohn00 Posted July 17 Share Posted July 17 See attached. When using the driver it permanently changes the temp, i can never get the “until xxx” time Quote Link to comment Share on other sites More sharing options...
DLite Posted July 17 Share Posted July 17 2 hours ago, ekohn00 said: See attached. When using the driver it permanently changes the temp, i can never get the “until xxx” time That behavior still seems the same in the new driver. It was kind of a pet peeve of mine too, but I eventually made peace with it. On the bright side, it helps you identify programmatic changes from human changes, and that can be helpful in some programming contexts. Quote Link to comment Share on other sites More sharing options...
DLite Posted July 17 Share Posted July 17 My other unresolved pet peeve is that 1/4 of the time when I update the Ecobee drivers, I lose every line of code that refers to an Ecobee device variable. It is super annoying whenever it happens. Quote Link to comment Share on other sites More sharing options...
ekohn00 Posted July 17 Share Posted July 17 2 hours ago, DLite said: That behavior still seems the same in the new driver. It was kind of a pet peeve of mine too, but I eventually made peace with it. On the bright side, it helps you identify programmatic changes from human changes, and that can be helpful in some programming contexts. @DLite there is a way......@msgreenf pointed out, just tap the hold button and the options show up for hold time. Quote Link to comment Share on other sites More sharing options...
DLite Posted July 17 Share Posted July 17 2 minutes ago, ekohn00 said: @DLite there is a way......@msgreenf pointed out, just tap the hold button and the options show up for hold time. Cool! That is a useful insight. Thanks, @msgreenf. Quote Link to comment Share on other sites More sharing options...
Don Cohen Posted July 19 Share Posted July 19 On 7/17/2024 at 7:06 PM, DLite said: My other unresolved pet peeve is that 1/4 of the time when I update the Ecobee drivers, I lose every line of code that refers to an Ecobee device variable. It is super annoying whenever it happens. This hasn't happened to me in the past with prior driver updates, but it definitely did with this last update. I had programming to alert me when the upstairs Ecobee thermostat went offline (as it does when the water pan fills, and turns the whole upstairs HVAC off). This happened last night, and I didn't receive the alert. I checked programming, and the couple of lines for this were gone. I'll have to check other functions now as well. Quote Link to comment Share on other sites More sharing options...
DLite Posted July 19 Share Posted July 19 This hasn't happened to me in the past with prior driver updates, but it definitely did with this last update. I had programming to alert me when the upstairs Ecobee thermostat went offline (as it does when the water pan fills, and turns the whole upstairs HVAC off). This happened last night, and I didn't receive the alert. I checked programming, and the couple of lines for this were gone. I'll have to check other functions now as well.Sorry to hear that. It really is frustrating. Don Cohen 1 Quote Link to comment Share on other sites More sharing options...
South Africa C4 user Posted July 20 Share Posted July 20 On 7/19/2024 at 1:05 PM, Don Cohen said: This hasn't happened to me in the past with prior driver updates, but it definitely did with this last update. I had programming to alert me when the upstairs Ecobee thermostat went offline (as it does when the water pan fills, and turns the whole upstairs HVAC off). This happened last night, and I didn't receive the alert. I checked programming, and the couple of lines for this were gone. I'll have to check other functions now as well. I’ve had this with other thermostat drivers. The CoolMasterNet being the most annoying for me. Got to the stage that I took screenshots of all my coding so I could recover following a driver update… Don Cohen 1 Quote Link to comment Share on other sites More sharing options...
DLite Posted July 20 Share Posted July 20 5 minutes ago, South Africa C4 user said: I’ve had this with other thermostat drivers. The CoolMasterNet being the most annoying for me. Got to the stage that I took screenshots of all my coding so I could recover following a driver update… I literally just did this after rewriting my code last time! South Africa C4 user 1 Quote Link to comment Share on other sites More sharing options...
Gutrmdp Posted July 31 Share Posted July 31 My other unresolved pet peeve is that 1/4 of the time when I update the Ecobee drivers, I lose every line of code that refers to an Ecobee device variable. It is super annoying whenever it happens.Could you put the code into a macro and then the macro into driver Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.