avtexan Posted July 10 Share Posted July 10 Once my Halo Remotes went to 1.8.3.001746 they would connect for a couple of minutes, then drop, then reconnect After trying many things, I think I found a solution if anyone else has the same issue on a UNIFI network with VLAN's I changed my VLAN setting of Guest Network to Isolate Network (Settings / Networks / Advanced / Manual). Things seem to be stable so far. Quote Link to comment Share on other sites More sharing options...
msgreenf Posted July 10 Share Posted July 10 You don't want c4 devices on your guest network error Quote Link to comment Share on other sites More sharing options...
avtexan Posted July 10 Author Share Posted July 10 My C4 gear is on its own VLAN and I have a separate VLAN for guests The "Guest Network Setting" was used to set default firewall rules within a VLAN. The Isolate is fairly new I think. Quote Link to comment Share on other sites More sharing options...
msgreenf Posted July 10 Share Posted July 10 20 minutes ago, avtexan said: My C4 gear is on its own VLAN and I have a separate VLAN for guests The "Guest Network Setting" was used to set default firewall rules within a VLAN. The Isolate is fairly new I think. Guest Network means at least one of the following two Host isolated from talking to the main Network Host isolated from talking to each other. You don't want either of those things to occur in A control4 Network Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.