alanchow Posted October 26, 2022 Share Posted October 26, 2022 Overview Ozuno is a premium lighting control systems company, that utilises extensive in-house technology innovation, engineering and development capabilities. They design, develop and produce lighting control and power management products specialising in DALI, Phase DIM, Ethernet, Emergency and 240V. The RAPIX Lighting Control system is a powerful, cost effective means for delivering smart DALI Lighting Control solutions simply and easily. RAPIX Lighting Control scales from very small and simple, to very large and complex. Control Lighting using DALI, including DALI phase dimmers and DALI relays. 100% DALI Compliant to IEC 62386. Supports DALI Device Type 8 for colour temperature (tunable white) and RGB. Program offsite to save time on site. Designed in Australia by industry veterans. Driver Features Manufacturer sponsored FREE driver Bi-directional IP based communications / feedback. Ability to automatically import Zones (Light v2 proxy) Scenes (Light switch proxy) Flags (Experience button proxy) Ability to automatically detect capabilities of zones or manually set capabilities. Zone Features On Off Dimming Color Color Temperature Scene Features On Off Flag Features On Off FAQ How much does this driver cost? This driver is manufacturer sponsored and is provided free of charge. Where i can i learn more about RAPIX? Please visit the Ozuno website for more information about the RAPIX lighting system. What hardware will this work on? The driver will work on Control4 OS 3.3.0 or higher and will work with RAPIX Zone Controllers. We recommend updating RAPIX to the latest version of firmware to ensure compatibility. Note it will not work with RAPIX eHub hardware due to the API we are using. What can I use flags for? Flags are on/off based variables used in RAPIX. This can be manipulated within Control4 to trigger RAPIX programming. It can also be used with RAPIX triggering Control4 programming. This is useful for when for example you want the flag change (eg button press) to trigger Control4 programming (eg all off macro). The driver will not connect even though the IP address entered is correct. The Control4 Director must be on a static IP Address and listed in the Unencrypted Connections list in the RAPIX project. See enabling third party control section of this document. The capability of the DALI load is incorrect. The driver will obtain the capabilities of the zone. Unfortunately not all Dali loads can be automatically detected due to non compliance to standards by certain manufacturers. As such if the capabilities are not detected then you can override the capabiltiies in the zone driver’s properties page. How do I find out more information about the driver? Please see the links below for more information about the driver. Driver Link Andrew luecke 1 Quote Link to comment Share on other sites More sharing options...
C4loso Posted October 26, 2022 Share Posted October 26, 2022 Very interesting driver. Are the DALI zones the same as DALI groups? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
alanchow Posted October 27, 2022 Author Share Posted October 27, 2022 13 hours ago, C4loso said: Very interesting driver. Are the DALI zones the same as DALI groups? Sent from my iPhone using Tapatalk You will need to reach out to Ozuno for information. It does group multiple DALI lights together. You can have one light in muliple zones for reference. The zone can report state as minimum, average or maximum level of the members of the zone. Quote Link to comment Share on other sites More sharing options...
C4loso Posted October 27, 2022 Share Posted October 27, 2022 You will need to reach out to Ozuno for information. It does group multiple DALI lights together. You can have one light in muliple zones for reference. The zone can report state as minimum, average or maximum level of the members of the zone.That’s actually pretty cool. Would you happen to know how many zones you can do? Or it’s the same with Dali groups = 16. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
alanchow Posted October 27, 2022 Author Share Posted October 27, 2022 10 hours ago, C4loso said: That’s actually pretty cool. Would you happen to know how many zones you can do? Or it’s the same with Dali groups = 16. Sent from my iPhone using Tapatalk I don’t know the answer to that question. I’m not an expert at this system. I can tell you everything about the driver though. You should reach out to Ozuno for questions about their system. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.