ILoveControl Posted November 19, 2020 Share Posted November 19, 2020 Hi all, Running 3.2.0 Running the latest driver and firmware for the DS2. I keep getting the following issue: helios_ip_handle_phone_status: Registered = false Event: RegistrationStateChanged Params: state: registering, sipAccount: 1 Event: RegistrationStateChanged: SIP ID: 1147, Registration State: registering Event: RegistrationStateChanged Params: state: unregistered, sipAccount: 1, reason: 403 Forbidden ---> C4:SendToProxy(5003, "CURRENT_STATE_CHANGED", {CURRENT_STATE = "0"}) NOTIFY.Current_State_Changed: Command = CURRENT_STATE_CHANGED; CURRENT_STATE = 0 Event: RegistrationStateChanged: SIP ID: 1148, Registration State: unregistered I have done the following: Removed the communications agent and readded - same result Removed the DS2 driver and installed from online Works for about a day then reverts back to that error. For some reason it works if I delete the driver then readd it but for less than a day then it is back to the error above. NOTE: The DS2 is working can get to it on the IP address through a browser. All function tested on it and it works. Network is working as I did a test on the network cable, the POE voltage and the access to the controller. Any idea? Quote Link to comment Share on other sites More sharing options...
Cyknight Posted November 19, 2020 Share Posted November 19, 2020 Hmm any chance the DS2 got reset to the default password? Quote Link to comment Share on other sites More sharing options...
ILoveControl Posted November 20, 2020 Author Share Posted November 20, 2020 Thank you @Cyknight, So what I did was take the password in the properties for root and then set it as Account 1 password. The weird part is how it works if you delete the driver and readd it then stops working. Don't know if that makes sense. Quote Link to comment Share on other sites More sharing options...
Cyknight Posted November 20, 2020 Share Posted November 20, 2020 Hmm odd one. Was the unit factory reset at any point? If so there may be a bunch of 'deeper' settings that aren't being automatically set by the system, and you may need to manually set them in the DS2 web-page. I'll have to see if I can find that list. Quote Link to comment Share on other sites More sharing options...
ILoveControl Posted November 20, 2020 Author Share Posted November 20, 2020 Thank you once again. I haven't hard reset it but thinking of doing it now tbh Quote Link to comment Share on other sites More sharing options...
Control4Savant Posted November 20, 2020 Share Posted November 20, 2020 1 minute ago, ILoveControl said: Thank you once again. I haven't hard reset it but thinking of doing it now tbh They are no longer plug and play once they are reset. I would not reset it unless you are prepared to go through the steps in the internal 2N config to get it to talk to Control4 again. What do you mean it works if you delete the driver? Quote Link to comment Share on other sites More sharing options...
ILoveControl Posted November 20, 2020 Author Share Posted November 20, 2020 3 hours ago, AVNeeds said: They are no longer plug and play once they are reset. I would not reset it unless you are prepared to go through the steps in the internal 2N config to get it to talk to Control4 again. What do you mean it works if you delete the driver? So if I delete the driver and readd it to the project it works for a day or so then stops working. When I enable debug I see the error above. Quote Link to comment Share on other sites More sharing options...
RyanE Posted November 22, 2020 Share Posted November 22, 2020 On 11/20/2020 at 1:16 PM, ILoveControl said: So if I delete the driver and readd it to the project it works for a day or so then stops working. When I enable debug I see the error above. There is an updated driver that should be released shortly, that may fix this issue, along with others. RyanE South Africa C4 user 1 Quote Link to comment Share on other sites More sharing options...
South Africa C4 user Posted November 22, 2020 Share Posted November 22, 2020 34 minutes ago, RyanE said: There is an updated driver that should be released shortly, that may fix this issue, along with others. RyanE Yay!!! Quote Link to comment Share on other sites More sharing options...
ILoveControl Posted November 23, 2020 Author Share Posted November 23, 2020 10 hours ago, RyanE said: There is an updated driver that should be released shortly, that may fix this issue, along with others. RyanE The big question now is I did a reset in the webui including network settings. Now the device comes online can see it on 192.168.1.100 but has no ports open, can't get to the webui nothing. Will it address that too? Or if I take it out and hard reset it will the new driver be able to reconfigure it? Quote Link to comment Share on other sites More sharing options...
ILoveControl Posted November 23, 2020 Author Share Posted November 23, 2020 So ended up following the hard reset sequence on the 2N site. It came back and used the default 2n user and password to do a auto configuration- username: admin password: 2n. Driver could communicate with it and I can access the camera but not sip. I am really hoping this updated driver is going to help @RyanE Quote Link to comment Share on other sites More sharing options...
Chico Posted November 24, 2020 Share Posted November 24, 2020 There are no issues of this kind with the DS2. I don’t have a single DS2 failing like yours. It does look like you have a password issue. This is that time when you should let a dealer look at your system and fix it. Again, no issues in any of my systems. Quote Link to comment Share on other sites More sharing options...
ILoveControl Posted November 24, 2020 Author Share Posted November 24, 2020 5 hours ago, Chico said: There are no issues of this kind with the DS2. I don’t have a single DS2 failing like yours. It does look like you have a password issue. This is that time when you should let a dealer look at your system and fix it. Again, no issues in any of my systems. I would read the thread above and response from @RyanEwho works at C4. This issue was also posted on the dealer forums, but thanks for taking the time to provide your detailed response. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.