Joey13 Posted October 17, 2020 Share Posted October 17, 2020 My DS2 decided to stop working properly a few months out of warranty. With such a huge price disparity for a new one I am going to go with the new Chime. With that said, I am working with a fabricating to make a plate and was wondering if someone could share the template and flush mounting instructions for DS2 Flush-mount. If it works well, I would be happy to share his contact information for anyone that wants to follow in my footsteps. I am sure C4 will address this one day, but I haven't heard anything yet. Truly appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
OceanDad Posted October 17, 2020 Share Posted October 17, 2020 I think that that this will print to scale, but you may want to check a couple of the dimensions if you can. DS2_Template.pdf Quote Link to comment Share on other sites More sharing options...
ejn1 Posted October 17, 2020 Share Posted October 17, 2020 2 hours ago, Joey13 said: My DS2 decided to stop working properly a few months out of warranty. With such a huge price disparity for a new one I am going to go with the new Chime. With that said, I am working with a fabricating to make a plate and was wondering if someone could share the template and flush mounting instructions for DS2 Flush-mount. If it works well, I would be happy to share his contact information for anyone that wants to follow in my footsteps. I am sure C4 will address this one day, but I haven't heard anything yet. Truly appreciated. Thanks Another option is using HDPE which is used in boats for backboards for electronics and other things. It's easy to cut and would also make for a good backing plate. Sometimes it's called Starboard. Comes in White and Black and potential you can find other colors (eg Gray). Will not discolor, rot, etc. Could even paint to match siding. OceanDad 1 Quote Link to comment Share on other sites More sharing options...
Joey13 Posted October 18, 2020 Author Share Posted October 18, 2020 Thank you both. I know it’s probably too soon, but is there a way to get the Chime Template? I wanted to have it pre drilled with nylon/rubber grommets. The gentlemen I am working with has 13 different color options and I am just trying to develop something that everyone can use at minimum cost. Thanks again Quote Link to comment Share on other sites More sharing options...
OceanDad Posted October 18, 2020 Share Posted October 18, 2020 This is the best I could do. May not print to scale. Quote Link to comment Share on other sites More sharing options...
Joey13 Posted October 21, 2020 Author Share Posted October 21, 2020 Thank you OceanDad. Here are two prototypes so far.. trying to make a third that mounts using the clip and the same hole where the DS2 mounts.. it would require a special mounting clip. I don’t have the chime, but I will install it this weekend to see what it looks like. Since mine is in stucco, I can use the four screw holes no problem. The other version uses double-sides tape. The third version would use the DS2 mounting locations. Quote Link to comment Share on other sites More sharing options...
Joey13 Posted October 21, 2020 Author Share Posted October 21, 2020 Quote Link to comment Share on other sites More sharing options...
wnpublic Posted October 21, 2020 Share Posted October 21, 2020 watching with interest, since i am in the same boat. thanks for taking this on. Quote Link to comment Share on other sites More sharing options...
Joey13 Posted October 30, 2020 Author Share Posted October 30, 2020 The chime I ordered didn’t come yet, so I was toying with it to see what it looks like.. I think I am going to change how it mounts and maybe mount it after removing the wall box.. to be continued.... Quote Link to comment Share on other sites More sharing options...
HomeAutomationNerd Posted October 31, 2020 Share Posted October 31, 2020 I installed the Chime over a 1/2 depth box. It looks horrible (!!). The Ethernet connector on the back of the Chime is a nightmare of "r/assholedesign" proportions. The product would be better if the Ethernet plugged directly into the product. As it sits, you need a > 1/2" hole in your plate to fit the connector through, and you need a deep enough box to hold the connector, and enough space to squish the cable in. If you don't have a box mounted into the house (I don't, but I do have Ethernet) I would avoid this product. If anyone comes up with a 3D Printed box, I would be interested. Embedding a box into the house in this location isn't an option. Quote Link to comment Share on other sites More sharing options...
dinom Posted November 1, 2020 Share Posted November 1, 2020 14 hours ago, ChrisM said: I installed the Chime over a 1/2 depth box. It looks horrible (!!). The Ethernet connector on the back of the Chime is a nightmare of "r/assholedesign" proportions. The product would be better if the Ethernet plugged directly into the product. As it sits, you need a > 1/2" hole in your plate to fit the connector through, and you need a deep enough box to hold the connector, and enough space to squish the cable in. If you don't have a box mounted into the house (I don't, but I do have Ethernet) I would avoid this product. If anyone comes up with a 3D Printed box, I would be interested. Embedding a box into the house in this location isn't an option. Seems like the WiFi version would have been a better solution for you, assuming you have an access point that’s close enough to work reliably. Quote Link to comment Share on other sites More sharing options...
wnpublic Posted November 2, 2020 Share Posted November 2, 2020 On 10/30/2020 at 3:16 PM, Joey13 said: The chime I ordered didn’t come yet, so I was toying with it to see what it looks like.. I think I am going to change how it mounts and maybe mount it after removing the wall box.. to be continued.... Looking pretty good! Quote Link to comment Share on other sites More sharing options...
Joey13 Posted January 15, 2021 Author Share Posted January 15, 2021 Finally installed. Daeni, RyanE and C4 User 1 2 Quote Link to comment Share on other sites More sharing options...
msgreenf Posted January 15, 2021 Share Posted January 15, 2021 Nice job! Quote Link to comment Share on other sites More sharing options...
badjesus Posted June 28 Share Posted June 28 Does anyone make something like this yet? @Joey13 can you share the contact of who made this for you? I hate my ******* ds2 and want to get rid of it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.