control4set Posted June 6, 2020 Share Posted June 6, 2020 will control4 support a monolith amplifier? or do I need to use control 4 amp? Quote Link to comment Share on other sites More sharing options...
mujtaba.khokhar Posted June 6, 2020 Share Posted June 6, 2020 probably yeah.... do you have a model number? as long as it has RCA or XLR inputs, speaker terminals for speakers. and the amp is fixed line level out. If its got XLR you'll have to either buy or make RCA to XLR cables. Thanks M Quote Link to comment Share on other sites More sharing options...
WholeHomeControl Posted June 6, 2020 Share Posted June 6, 2020 The Control4 amps are dumb (ie there is no communication with the amp through drivers.) Any system design that uses a C4 amp (not to be confused with a matrix amp) can instead use any other dumb amp with RCA inputs and suitable specs to drive your speakers. Quote Link to comment Share on other sites More sharing options...
SMHarman Posted June 6, 2020 Share Posted June 6, 2020 will control4 support a monolith amplifier? or do I need to use control 4 amp?Any amp with a remote power on trigger or even sub optimally a audio signal on trigger. My primary whole home audio amp is a AMX Aleroo. Control4 sees a Control4 power amp driver with power on feedback. When a room is activated that driver knows to send 12 V trigger to the amp and power it on. The Audio matrix or AVR or EA controls the volume and content of the audio feed.Model number and this is easy to 100% confirm. Quote Link to comment Share on other sites More sharing options...
control4set Posted June 11, 2020 Author Share Posted June 11, 2020 yes this one Monolith by Monoprice 7x200 Watts Per Channel Multi-Channel Home Theater Power Amplifier with XLR Inputs Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.