KingCity Posted March 13, 2020 Share Posted March 13, 2020 I lost the instruction on how to identify the Yale Real Living in Composer 2.10.6. Upgrading driver to V2 version and need to reset lock to factory default then add back into Composer. Thanks for any tips. Quote Link to comment Share on other sites More sharing options...
ejn1 Posted March 13, 2020 Share Posted March 13, 2020 https://www.yalehome.com/Yale/Yale US/Real Living/installation instructions/Yale DB PUSH Quickstart 18JUL11_Rev B.pdf It should be in there I think... Quote Link to comment Share on other sites More sharing options...
KingCity Posted March 13, 2020 Author Share Posted March 13, 2020 Thanks. Doesn’t mention as to how to ID in Control4 Quote Link to comment Share on other sites More sharing options...
ejn1 Posted March 13, 2020 Share Posted March 13, 2020 You have to have your dealer ID it into your project. If you have Home Edition Composer, you may be able to read the driver instructions there but you have to ID into project via dealer. Quote Link to comment Share on other sites More sharing options...
KingCity Posted March 13, 2020 Author Share Posted March 13, 2020 I am a dealer with Composer but the Documentation for the driver doesn’t specify how to ID Quote Link to comment Share on other sites More sharing options...
ejn1 Posted March 13, 2020 Share Posted March 13, 2020 4 minutes ago, KingCity said: I am a dealer with Composer but the Documentation for the driver doesn’t specify how to ID If memory serves me, you have to put the lock in identify mode (I think I saw that in the instructions I attached), then the dealer identifies it in the Connections tab. Suggest you start with a complete reset. Quote Link to comment Share on other sites More sharing options...
Crustyloafer Posted March 13, 2020 Share Posted March 13, 2020 To identify, you want to choose the 'Register' option. https://www.dropbox.com/s/98smfmw5mje8xpf/Screenshot 2020-03-13 16.49.52.png?dl=0 Quote Link to comment Share on other sites More sharing options...
Crustyloafer Posted March 13, 2020 Share Posted March 13, 2020 Full manual here: https://www.dropbox.com/s/y34573nbcf7mgg5/Key Free Yale DB TOUCH Instructions 31JAN13.pdf?dl=0 Quote Link to comment Share on other sites More sharing options...
ShrumpTheOrc Posted May 4, 2020 Share Posted May 4, 2020 I've been running into this problem as well, I go through the register mode on the Yale Lock (Master Code>7>#>1>#). Soon as I hit the last '#' it says complete, but I go back to my Director where I have the Connection page open for pairing, I've waited as long as 5 min and it never shows up. My back door lock is about 1' away from a bank of C4 dimmers, so I don't believe it is a ZigBee range issue. Anyone got any ideas? I'm running OS 2.10.6 Quote Link to comment Share on other sites More sharing options...
mstafford388 Posted May 4, 2020 Share Posted May 4, 2020 1 hour ago, ShrumpTheOrc said: I've been running into this problem as well, I go through the register mode on the Yale Lock (Master Code>7>#>1>#). Soon as I hit the last '#' it says complete, but I go back to my Director where I have the Connection page open for pairing, I've waited as long as 5 min and it never shows up. My back door lock is about 1' away from a bank of C4 dimmers, so I don't believe it is a ZigBee range issue. Anyone got any ideas? I'm running OS 2.10.6 Did you purchase the lock from C4? you need to. Quote Link to comment Share on other sites More sharing options...
ShrumpTheOrc Posted May 4, 2020 Share Posted May 4, 2020 56 minutes ago, mstafford388 said: Did you purchase the lock from C4? you need to. no. I pulled the lock from an existing C4 system when client upgraded from C4 to Savant. So i think problem is with the lock not staying in pairing mode for more than 1/2 a second. It immediately going 7>#>1>#>"Complete." It's just weird because I've never had this problem before on other locks when trying to pair to C4. Quote Link to comment Share on other sites More sharing options...
mstafford388 Posted May 4, 2020 Share Posted May 4, 2020 52 minutes ago, ShrumpTheOrc said: no. I pulled the lock from an existing C4 system when client upgraded from C4 to Savant. Upgraded. haha. Quote Link to comment Share on other sites More sharing options...
Neo1738 Posted May 5, 2020 Share Posted May 5, 2020 6 hours ago, mstafford388 said: Upgraded. haha. I was going to say the same thing. Why was it such an "upgrade" Quote Link to comment Share on other sites More sharing options...
brodog Posted May 15, 2022 Share Posted May 15, 2022 I finally figured this it out with my Yale Assure lock. Maybe this will help you. 1. remove batteries 2. remove the zigbee radio (it should slide out easily) 3. insert the zigbee radio (it should slide in easily) 4. Insert batteries (lock will start up and do some happy beeps) 5. Open C4 composer's zigbee network settings, select the lock (that needs identified) so you get the usual popup the asks you to identify the device. 6. On the lock's keypad: Enter your master code Then settings (gear) button Then 7 Then settings (gear) button Then 1 Then settings (gear) button. The lock should do some happy beeps, then after a few seconds Composer should show the identification info. Note: my first failed attempt was only steps 5 and 6. Only when doing 1-6 did it work. Quote Link to comment Share on other sites More sharing options...
JoseLuis1225 Posted July 24 Share Posted July 24 Hello, I am also trying to identify a real living Yale lock in a project with version 2.10.6, but the only zigbee driver I can find for Yale is the smart lookcs one, I would like to know if that is the driver that works with this type of locks Or if you can tell me which driver I should use and where I can download it, thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.