msgreenf Posted October 6, 2020 Share Posted October 6, 2020 NoSent from my Pixel 3a XL using Tapatalk Quote Link to comment Share on other sites More sharing options...
timbooo Posted December 9, 2020 Share Posted December 9, 2020 I'm trying to add some cameras that are directly attached to an NVR. I have followed your instructions to a T. The cameras are found, the info pours into the various boxes when the final step is done (entering the IP). However I only ever manage to get a static image. If I change the substream in the camera's own settings page to MJEG and set the camera driver to use the substream (preferred stream 2) the feed starts coming through nice and smooth. But then at some point the NVR resets the substream to H264 - there is no option in the NVR to choose MJPEG. It was my understanding that the EA controllers and T3 touchscreens had support for h264 so I don't know why it isn't working. Quote Link to comment Share on other sites More sharing options...
alanchow Posted December 9, 2020 Author Share Posted December 9, 2020 4 hours ago, timbooo said: I'm trying to add some cameras that are directly attached to an NVR. I have followed your instructions to a T. The cameras are found, the info pours into the various boxes when the final step is done (entering the IP). However I only ever manage to get a static image. If I change the substream in the camera's own settings page to MJEG and set the camera driver to use the substream (preferred stream 2) the feed starts coming through nice and smooth. But then at some point the NVR resets the substream to H264 - there is no option in the NVR to choose MJPEG. It was my understanding that the EA controllers and T3 touchscreens had support for h264 so I don't know why it isn't working. Please submit a ticket or call our office for support (AEDT business hours). I didn’t develop this driver myself so I can’t really help you on this one and the guy that did doesn’t visit forums. Quote Link to comment Share on other sites More sharing options...
alanchow Posted July 22, 2021 Author Share Posted July 22, 2021 Major Update Added support for the Hikvision I and K series NVRs and DVRs for IP based remote control simluation. Note that this requires a special firmware developed by Hikvision for us available here - https://us.hikvision.com/control4-smart-home-solution Added licence plate recognition functionality for supporting cameras Improved collection of available Basic and Smart Events for creating bindings Quote Link to comment Share on other sites More sharing options...
DanITman Posted July 22, 2021 Share Posted July 22, 2021 6 minutes ago, alanchow said: Major Update Added support for the Hikvision I and K series NVRs and DVRs for IP based remote control simluation. Note that this requires a special firmware developed by Hikvision for us available here - https://us.hikvision.com/control4-smart-home-solution Added licence plate recognition functionality for supporting cameras Improved collection of available Basic and Smart Events for creating bindings Well done, I have an NVR sitting here that I can test it on. Would love to see a driver for the hikvision doorbell ds-hd1. I find it awesome that they want to expand Control4 support. Quote Link to comment Share on other sites More sharing options...
DaveDodd Posted July 25, 2021 Share Posted July 25, 2021 On 7/22/2021 at 3:51 AM, alanchow said: Major Update Added support for the Hikvision I and K series NVRs and DVRs for IP based remote control simluation. Note that this requires a special firmware developed by Hikvision for us available here - https://us.hikvision.com/control4-smart-home-solution Added licence plate recognition functionality for supporting cameras Improved collection of available Basic and Smart Events for creating bindings oh shame, only the K2 turbo, I have a K1 Quote Link to comment Share on other sites More sharing options...
South Africa C4 user Posted July 25, 2021 Share Posted July 25, 2021 1 hour ago, DaveDodd said: oh shame, only the K2 turbo, I have a K1 I also have a K1 - so does the K1 not qualify for this driver? Quote Link to comment Share on other sites More sharing options...
DaveDodd Posted July 25, 2021 Share Posted July 25, 2021 1 hour ago, South Africa C4 user said: I also have a K1 - so does the K1 not qualify for this driver? From what i gather...For camera streams its ok...but the IP control of the on screen display from the NVR/DVR's hdmi out its not. Quote Link to comment Share on other sites More sharing options...
South Africa C4 user Posted July 25, 2021 Share Posted July 25, 2021 5 hours ago, DaveDodd said: From what i gather...For camera streams its ok...but the IP control of the on screen display from the NVR/DVR's hdmi out its not. Thanks. I’ll give it a try next weekend. Quote Link to comment Share on other sites More sharing options...
DaveDodd Posted July 26, 2021 Share Posted July 26, 2021 On 7/22/2021 at 3:51 AM, alanchow said: Major Update Added support for the Hikvision I and K series NVRs and DVRs for IP based remote control simluation. Note that this requires a special firmware developed by Hikvision for us available here - https://us.hikvision.com/control4-smart-home-solution Added licence plate recognition functionality for supporting cameras Improved collection of available Basic and Smart Events for creating bindings Alan,, after driver update i can no longer pull snapshots only H.264 works...meaning no C4 app preview. Any ideas? Nothing has changed my side other than the latest version of the driver. Thanks. Quote Link to comment Share on other sites More sharing options...
DaveDodd Posted July 26, 2021 Share Posted July 26, 2021 11 minutes ago, DaveDodd said: Alan,, after driver update i can no longer pull snapshots only H.264 works...meaning no C4 app preview. Any ideas? Nothing has changed my side other than the latest version of the driver. Thanks. Ok, got it working again....I had to Re-build bindings for each camera. Quote Link to comment Share on other sites More sharing options...
alanchow Posted July 26, 2021 Author Share Posted July 26, 2021 11 hours ago, South Africa C4 user said: I also have a K1 - so does the K1 not qualify for this driver? 13 hours ago, DaveDodd said: oh shame, only the K2 turbo, I have a K1 You guys will need to reach out to Hikvision support to see if your hardware is compatible with the firmware. Highly recommend this before upgrading in case you brick it. Quote Link to comment Share on other sites More sharing options...
OceanDad Posted July 26, 2021 Share Posted July 26, 2021 Just tried this on a 9664NI-I8 NVR. Works very well for controlling the menu functions via IP. Have been trying to find a workaround for this for quite some time. Lets me push the full 4K HDMI output through an AV matrix, and control the camera view via a C4 remote. Useful. Thanks, @alanchow alanchow 1 Quote Link to comment Share on other sites More sharing options...
bigzaj Posted August 5, 2021 Share Posted August 5, 2021 Is there any trick to getting the PTZ controls working via the driver? I've got a DS-7608NI-I2 / 8P with 4 PTZ cameras and 4 domes. The streams work fine and I can control the PTZ from the Hikvision App or the web interface, but not via the C4 app. The Lua output shows the command is coming in, but there is a disconnect somewhere as the cameras don't respond. Curious if there are specific NVR settings or specific setup I need in the driver to work with a camera behind an NVR. Quote Link to comment Share on other sites More sharing options...
alanchow Posted August 5, 2021 Author Share Posted August 5, 2021 7 hours ago, bigzaj said: Is there any trick to getting the PTZ controls working via the driver? I've got a DS-7608NI-I2 / 8P with 4 PTZ cameras and 4 domes. The streams work fine and I can control the PTZ from the Hikvision App or the web interface, but not via the C4 app. The Lua output shows the command is coming in, but there is a disconnect somewhere as the cameras don't respond. Curious if there are specific NVR settings or specific setup I need in the driver to work with a camera behind an NVR. You most likely have not got the auth setup correctly. If that doesn't do the trick then reach out to our helpdesk for additional support https://www.chowmainsoft.com/support Quote Link to comment Share on other sites More sharing options...
ERDrPC Posted December 9, 2021 Share Posted December 9, 2021 Anyone with the Chowmain Hikvision NVR driver know the NVR keypress command to return to 4x4 multi-camera view. I used to use a camera jump for door bell press as I have EA1 behind all key TVs but not happy with the resolution. I plugged the 4k HDMI output of my NVR into my JAP system. I know how to program the NVR video output to the correct camera but I don't know how to make it go back to the full screen 4x4 view after my video "jump" is complete Also - any idea why none of my IP cameras show up as an attachment for a push notification. Only my doorbird camera snapshot is selectable. Quote Link to comment Share on other sites More sharing options...
alanchow Posted December 9, 2021 Author Share Posted December 9, 2021 1 hour ago, ERDrPC said: Anyone with the Chowmain Hikvision NVR driver know the NVR keypress command to return to 4x4 multi-camera view. I used to use a camera jump for door bell press as I have EA1 behind all key TVs but not happy with the resolution. I plugged the 4k HDMI output of my NVR into my JAP system. I know how to program the NVR video output to the correct camera but I don't know how to make it go back to the full screen 4x4 view after my video "jump" is complete Also - any idea why none of my IP cameras show up as an attachment for a push notification. Only my doorbird camera snapshot is selectable. Regarding switching the grid view, the PREV button on the Hikvision remote toggles through the available grid sizes. By default the driver doesn't map a C4 remote button to PREV. You can program any of the following buttons to be PREV: CC, INPUT/TV-VIDEO, RECALL, INFO, DVR, PLAY, GUIDE or Blue/Red/Green/Yellow BUTTONs. With the push notification the hikvision camera drivers are definitely selectable. I assume you also installed the camera drivers and not only the NVR driver. If so please make sure it is on the latest version of the driver as well as we added that feature in at some point in time. Quote Link to comment Share on other sites More sharing options...
swissglobalsolutions Posted December 20, 2021 Share Posted December 20, 2021 Hi, I've done some installs with HikVision before but not together with a Control4 system. I'm curious to know if you have experience with the Hikvision AcuSense line which is supposed to be able to identify if the motion is made by a human or not. We would like to be able to use that as a trigger to switch on the light on the outside areas of a project we are planing. Since this villa is in the jungle of Ubud there might be monkeys there and other wild animals so if that system could only trigger the light when it detects a motion event by a human it would be awesome. Cheers Quote Link to comment Share on other sites More sharing options...
alanchow Posted December 20, 2021 Author Share Posted December 20, 2021 11 hours ago, swissglobalsolutions said: Hi, I've done some installs with HikVision before but not together with a Control4 system. I'm curious to know if you have experience with the Hikvision AcuSense line which is supposed to be able to identify if the motion is made by a human or not. We would like to be able to use that as a trigger to switch on the light on the outside areas of a project we are planing. Since this villa is in the jungle of Ubud there might be monkeys there and other wild animals so if that system could only trigger the light when it detects a motion event by a human it would be awesome. Cheers I can’t say if it’ll differentiate between monkeys and humans. It’s best to reach out to Hikvision about that question. What I can tell you is that all smart events regardless of models are imported into Control4 swissglobalsolutions 1 Quote Link to comment Share on other sites More sharing options...
OceanDad Posted December 20, 2021 Share Posted December 20, 2021 3 hours ago, alanchow said: I can’t say if it’ll differentiate between monkeys and humans Questions that you don't see everyday Makes a change from the usual 'why does my Sony TV not wake-on-LAN ?' or 'is there a mini driver for Splunge/Oink/Grobble ?' swissglobalsolutions and BY96 1 1 Quote Link to comment Share on other sites More sharing options...
ERDrPC Posted January 25, 2022 Share Posted January 25, 2022 Answered my own question Quote Link to comment Share on other sites More sharing options...
Popolou Posted February 14, 2022 Share Posted February 14, 2022 Curious, does the driver have the ability to trigger the alarm outputs/IO relays to the NVR? Cheers Pops Quote Link to comment Share on other sites More sharing options...
alanchow Posted February 17, 2022 Author Share Posted February 17, 2022 On 2/15/2022 at 1:26 AM, Popolou said: Curious, does the driver have the ability to trigger the alarm outputs/IO relays to the NVR? Cheers Pops I don't know the answer to that question as i didn't write the driver myself. Please reach out via our support and it'll get escalated to Justin who wrote the driver. He'll be able to answer it. https://www.chowmainsoft.com/support Quote Link to comment Share on other sites More sharing options...
alanchow Posted March 7, 2022 Author Share Posted March 7, 2022 Today we are proud to release the Hikvision Doorstation driver for Control4. This integration is now included as part of Chowmain’s Hikvision driver suite which integrates Hikvision’s DVR’s, NVR’s and IP cameras providing not only live view on IP cameras but smart events on motion, line crossing, licence plate recognition and more if utilized with AcuSense or ANPR Cameras along with virtual remote control simulation on I series NVRs and TurboHD DVRs. Existing customers will get this new Intercom driver at no additional cost. Pricing of the driver suite will not be increased. This integration lowers the price of door station integration for Control4 home owners making it affordable for all installation sizes. Chowmain and Hikvision have worked closely on making the doorstation integration seamless in Control4. This includes creation of a custom firmware tailored to Control4 allowing doorstations to call Control4 touchscreens and mobile applications with video and audio communications. Integration is not only limited to communications and the driver provides control over electronic locks connected to the door station along with smart event feedback. Smart event feedback is the most powerful feature of the integration. Examples of smart event programming include playback of doorbell sounds across all speakers in the home when the call button is pushed, automated porch/pathway lighting when motion is detected along with push notifications with image snapshot on these events. A summary of the intercom driver's functionality is as below. Integration to Control4's Communication Agent / SIP Server. Providing the ability to call Control4 touchscreens and mobile devices (4sight required) for both video and audio communications. The Hikvision DS-KV8xx3-WME1 range of door stations can be configured automatically by the driver to work with Control4 for convenient set up and configuration Ability to set Control4's Intercom Custom Button actions Ability to trigger electronic locks (output 1 & 2) Ability to use the door station as a regular IP camera stream Automatic push notifications with snapshot for motion and/or call button press (requires 4sight) Through Hikvision's alert stream technology, our driver can provide the following real time notifications for integrators to program against:Video motion detection alerts Call button press Line busy (no answer) Call Answered Alarm 1 - 4 Triggered (traditionally 1 & 2 are used for door state closed, 3 & 4 is used for exit button pushed but can be used for other programming) This doorstation integration is compatible with the following models of door station. DS-KV8113-WME1 DS-KV8413-WME1 DS-KV8213-WME1 Popolou 1 Quote Link to comment Share on other sites More sharing options...
Midnight1982 Posted June 5, 2022 Share Posted June 5, 2022 Any progress on the driver for the DS-KD8001 hik vision door stations? Popolou 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.