C4CA Posted September 5, 2019 Share Posted September 5, 2019 Does anyone know if there’s a way to disable WOL on the c4 hdmi matrix? Every time the system is reset all TVs turn on. Quote Link to comment Share on other sites More sharing options...
-defunct- Posted September 5, 2019 Share Posted September 5, 2019 The matrix switch wouldn't be sending a WOL packet. That would likely be the Control4 controller and drivers in the system. Quote Link to comment Share on other sites More sharing options...
Cyknight Posted September 5, 2019 Share Posted September 5, 2019 ? Odd that it would do that, but yes thats not going to be coming from the hdmi switch, more likely the controller, or something else entirely....is HDMI control on on the tvs? Quote Link to comment Share on other sites More sharing options...
C4CA Posted September 5, 2019 Author Share Posted September 5, 2019 It’s controlled via HDBT. Quote Link to comment Share on other sites More sharing options...
-defunct- Posted September 5, 2019 Share Posted September 5, 2019 Like the network communication goes through HDBT? Does it do it if you power cycle only the HDMI switch or when you only power cycle the Control4 controller? Quote Link to comment Share on other sites More sharing options...
Cyknight Posted September 6, 2019 Share Posted September 6, 2019 On 9/5/2019 at 12:16 PM, C4CA said: It’s controlled via HDBT. No it's not . HDBaseT doesn't offer control. I can tell you this, this is the first time I've hear of this happening, and I've done dozens of them. So again, your issue isn't likely the hdmi switch, but something else. Could be programming (though who would program a system to turn on TVs on project load is a mystery to me outside of perhaps a commerial setting) - or something else is causing it, including HDMI control on the TV.... As epr above, isolate if it's on controlelr or HDMI switch reboot. If HDMI switch, remove all but one TV and no sources, then try again. But I think the real question is why your system is rebooting so often.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.