discipulus1 Posted July 28, 2019 Share Posted July 28, 2019 Is there anyway to use the built in thermistor and an external thermistor at the same time with one unit? I want to check the air temp and water temp without buying a second unit if possible. Thank you Link to comment Share on other sites More sharing options...
Cyknight Posted July 28, 2019 Share Posted July 28, 2019 You can program against either one at the same time, but you can only SHOW one on an interface with the available 3 rd party drivers. Meaning you can set up email alerts against both at different levels, but direct temp monitoring on an interface isn't possilb e Link to comment Share on other sites More sharing options...
Cyknight Posted July 28, 2019 Share Posted July 28, 2019 PS you do this under the device variables, the main device event only triggers on the 'set' thermistor. Link to comment Share on other sites More sharing options...
South Africa C4 user Posted July 28, 2019 Share Posted July 28, 2019 I would have thought that you could use the fre Yatun thermostat driver (or possibly the Control4 temperature viewer - probably have the name wrong) driver to display the second temperature. It may require a few lines of code. I know that I show both the internal and external values for other equipment (Z2IO) in this way. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.