JSTRONG Posted July 31, 2019 Share Posted July 31, 2019 I think maybe Jakblak accidentally uploaded the original HT-NT3 Quote Link to comment Share on other sites More sharing options...
JSTRONG Posted July 31, 2019 Share Posted July 31, 2019 I just realized You dont have pro.. Can someone else let me know if the HT-NT3 above shows a modified date of 2015 or 2019 Thanks Quote Link to comment Share on other sites More sharing options...
dinom Posted July 31, 2019 Author Share Posted July 31, 2019 I think maybe jakblak simply posted the old driver by mistake. Quote Link to comment Share on other sites More sharing options...
jakblak Posted August 1, 2019 Share Posted August 1, 2019 I’ll check it out a little later tonight @Cartnj Quote Link to comment Share on other sites More sharing options...
jakblak Posted August 1, 2019 Share Posted August 1, 2019 @Cartnj: Try typing the following commands. gSystemVolumeDisplay = "STEP" local tParams = {LEVEL="80", OUTPUT=1000} PRX_CMD.SET_VOLUME_LEVEL(1000, tParams) If you have the right driver, it should result in the following output ProcessVolumeLevel(level in=80, level out=40) PRX_CMD.SET_VOLUME_LEVEL(), volumeLevel_Step = 40 JSTRONG 1 Quote Link to comment Share on other sites More sharing options...
jakblak Posted August 1, 2019 Share Posted August 1, 2019 Either way, here's an updated driver. It should work identically to the ST9 driver. Try sending the commands I posted above and if you get the correct output then everything should work. receiver_HT-NT3_Network_DriverWorks__Sony.c4z JSTRONG and knowitall 1 1 Quote Link to comment Share on other sites More sharing options...
JSTRONG Posted August 1, 2019 Share Posted August 1, 2019 Thank you very much. I will upload this tonight. Quote Link to comment Share on other sites More sharing options...
JSTRONG Posted August 1, 2019 Share Posted August 1, 2019 21 hours ago, jakblak said: Either way, here's an updated driver. It should work identically to the ST9 driver. Try sending the commands I posted above and if you get the correct output then everything should work. receiver_HT-NT3_Network_DriverWorks__Sony.c4z 22.26 kB · 0 downloads Jakblak you are a hero! It works great. I really appreciate. Quote Link to comment Share on other sites More sharing options...
Benoît van Osch Posted January 26, 2020 Share Posted January 26, 2020 Slightly different problem but my Denon AVR-3808 is controlled through RS232 and it does not provide volume level feedback. I can pulse the volume up and down with buttons no problem but what is the workaround for the slider on the C4 display or app in this case? Does anyone know if the slider be used as a Up & Down pulse somehow? The AVR does IP control via the Denon (DeRemote) app with volume feedback etc. but I so far have not managed to find a Control4 driver that supports this. Any help would be much appreciated. Quote Link to comment Share on other sites More sharing options...
msgreenf Posted January 26, 2020 Share Posted January 26, 2020 1 hour ago, Benoît van Osch said: Slightly different problem but my Denon AVR-3808 is controlled through RS232 and it does not provide volume level feedback. I can pulse the volume up and down with buttons no problem but what is the workaround for the slider on the C4 display or app in this case? Does anyone know if the slider be used as a Up & Down pulse somehow? The AVR does IP control via the Denon (DeRemote) app with volume feedback etc. but I so far have not managed to find a Control4 driver that supports this. Any help would be much appreciated. Is there a reason that you are doing Serial not IP control then? It could be a limitation of serial control spec for that AVR Quote Link to comment Share on other sites More sharing options...
Benoît van Osch Posted January 26, 2020 Share Posted January 26, 2020 1 hour ago, msgreenf said: Is there a reason that you are doing Serial not IP control then? It could be a limitation of serial control spec for that AVR I can't find an IP driver for this particular model. Serial works fine just no volume feedback. Do you know if there is a workaround to the slider on the T3 displays, so I can pulse volume up/down instead of using the slider? Quote Link to comment Share on other sites More sharing options...
JSTRONG Posted January 26, 2020 Share Posted January 26, 2020 im almost positive 232 does not give volume feedback on this denon Quote Link to comment Share on other sites More sharing options...
lippavisual Posted January 27, 2020 Share Posted January 27, 2020 Incorrect. All denons /marantz avr’s provide volume feedback via rs232. Ive run into this in several jobs where feedback worked great on 2.9.1 but once the project was upgraded to 2.10.6 or above, feedback stopped and actually caused me a good amount of grief for some volume related programming. Quote Link to comment Share on other sites More sharing options...
GregC Posted February 16, 2021 Share Posted February 16, 2021 Hi jakblak, I'm having the same issue with the Sony HT-z9f soundbar driver. Any chance you might be able to write a corrected driver for that one? Thanks greg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.