poseidonsystems Posted April 22, 2019 Share Posted April 22, 2019 Hi all, I have 3 shades that are controlled via low voltage wall buttons. Each one has three buttons which is up/down/stop. I can access the wires in the back and when I short each wire, they do their respective action, shade up, shade down, shade stop. However, I am looking for a network controlled relay that connects to wifi or wired network and I can just make generic http calls. Any one know of a device that can do this?? Link to comment Share on other sites More sharing options...
msgreenf Posted April 22, 2019 Share Posted April 22, 2019 https://drivercentral.io/platforms/control4-drivers/utility/control-by-web-control4-driver-chowmain/Sent from my Pixel 3 using Tapatalk Link to comment Share on other sites More sharing options...
poseidonsystems Posted April 23, 2019 Author Share Posted April 23, 2019 Oh man, that's kind of steep...$285 for an 8 channel..and $100 might as well get 4 Control4 I/Os relays! Link to comment Share on other sites More sharing options...
Crustyloafer Posted April 23, 2019 Share Posted April 23, 2019 One of these: https://sigma-shop.com/product.php?ProductID=109 with driver from here: https://drivercentral.io/platforms/control4-drivers/utility/kmtronic-8-relay-ip-board/ Link to comment Share on other sites More sharing options...
Matt Lowe Posted April 27, 2019 Share Posted April 27, 2019 On 4/22/2019 at 2:54 PM, poseidonsystems said: Hi all, I have 3 shades that are controlled via low voltage wall buttons. Each one has three buttons which is up/down/stop. I can access the wires in the back and when I short each wire, they do their respective action, shade up, shade down, shade stop. However, I am looking for a network controlled relay that connects to wifi or wired network and I can just make generic http calls. Any one know of a device that can do this?? can find some io extenders on ebay for cheap. Link to comment Share on other sites More sharing options...
david@berto.co.uk Posted April 30, 2019 Share Posted April 30, 2019 On 4/22/2019 at 10:54 PM, poseidonsystems said: Hi all, I have 3 shades that are controlled via low voltage wall buttons. Each one has three buttons which is up/down/stop. I can access the wires in the back and when I short each wire, they do their respective action, shade up, shade down, shade stop. However, I am looking for a network controlled relay that connects to wifi or wired network and I can just make generic http calls. Any one know of a device that can do this?? I have just developed a driver for the Shelly relay range, https://shelly.cloud/product/wifi-smart-home-automation-shelly-25-switch-relay-roller-shutter/ See https://github.com/davidmassot/Berto Good piece of reliable hardware Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.