alanchow Posted February 12, 2018 Share Posted February 12, 2018 Chowmain - Sensibo HVAC Controller driver Sensibo makes several products to automate air within your home. The Sensibo Air & Sensibo Sky makes your existing air conditoner smart and connected! Sensibo is an external device that you pair your remote controlled air conditioner with. Sensibo will work with the majority of infra-red based HVAC systems whether it is a mini split, window AC, ductless, portable, heat pump and even central air conditioners. The Sensibo Pure is the world's most advanced smart air purifier that will keep you healthy and energized. Sensibo Pure has a built in sensor measuring your indoor air quality providing feedback on good, modern or unhealthy air. It is equipped with specially designed strong HEPA & Carbon filters, removes particles as small as 0.1um and protects against viruses, bacteria, dust, smoke, bad odors. The Chowmain driver for Sensibo communicates to Sensibo devices via the Sensibo Cloud API. For Air & Sky models it enables full two way control and feedback over room temperature, humidity, setpoints, hvac mode and fan speeds. The driver will even configure itself based on the HVAC system capabilities. For the Pure model it will allow you to control on/off, fan speeds, LED lights and provide you with air quality and filter feedback. NOTE An active and stable internet connection is required for Sensibo to operate with Control4. Features Sensibo Air & Sensibo Sky No static IP address required. Automatic configuration of available modes based on HVAC system capabilities. Control over HVAC mode Fan mode Setpoint Swing Feedback from Room Temperature Humidity Preset functionality Scheduling functionality Sensibo Pure No static IP address required. Control / Feedback over On / Off Fan Low / High LED Off, Dim, On Events for Good Air Quality Moderate Air Quality Unhealthy Air Quality Filter needs replacement Automatic Email and Push notifications on all events (NOTE: Requires 4sight subscription) FAQ Why is this product exciting? Sensibo Air / Sensibo Sky In Australia and New Zealand (and other countries) HVAC integration has been hard because HVAC companies do not utilise the honeywell based wiring that most smart thermostats like Nest, Control4 and Honeywell use. Split Systems have been extremely hard as traditionally they only offer IR based remote controls. In the past we have integrated these systems by learning every combination of IR code however this is extremely time consuming. Now with the Sensibo installers can now easily integrate HVAC systems into Control4. Sensibo is extremely affordable unlike other solutions so the cost of integration is extremely low. On top of that it communicates via wifi so dealers can now revisit old customers with compatible HVAC systems to upgrade their home automation system and integrate their HVAC systems without additional wiring. This really changes the HVAC game. Sensibo Pure We have had lots of requests for air filtration and also air quality detection over the past few years. The Sensibo Pure is equipped with an indoor air quality sensor and measures your indoor air quality. It has the most advanced filtration technology with a combination of 3 filters. The Pre-Filter will assist with filtering of large dust particles (PM10) which includes Pollen. The HEPA Filter assists with viruses, bacteria, PM2.5 and fine dusty particles. Finally the Carbon Filter will assist with formalehyde, acetone, cooking gas, etc. With its built in Wifi technology it can be placed anywhere in the home with good wifi signal and with integration to Control4 can not only warn home owners of harmful air but can also work in conjunction with the fans around your home to boost air purification by up to 70%.What HVAC systems can i use this driver with? Sensibo is compatible with a range of infra-red HVAC systems. Please see the Sensibo website to check if the HVAC system you want to integrate is compatible. https://sensibo.com/ Can i control fan direction with this? Yes our driver allows for swing control. This is accessible under the Extras Tab. Can i do schedule the HVAC system using this? Yes our driver has built in presets and scheduling. Where can i purchase this module? Sensibo is available from various retailers off the shelf (eg Bing Lee, Harvey Norman, Good Guys, etc) or can be purchased online from OzSmartThings, Amazon or directly via the Sensibo website https://sensibo.com/ How do I find out more information about the driver? Please see the links below for more information about the driver. Chowmain Website Installation Guide How do I buy the driver? This driver can be purchased from our distributor driverCentral. Download Driver / Purchase Licence Who do i contact for technical support? We have two support desks. One in Australia and one in the US. Click on the link below for details. Support Do you provide trial licences? All Chowmain drivers for Control4 come with a 90 day trial. Quote Link to comment Share on other sites More sharing options...
bdo21 Posted April 18, 2021 Share Posted April 18, 2021 Do we need a particular Sensibo product (Sky or Air)? Thanks! Quote Link to comment Share on other sites More sharing options...
alanchow Posted April 19, 2021 Author Share Posted April 19, 2021 12 hours ago, bdo21 said: Do we need a particular Sensibo product (Sky or Air)? Thanks! No the driver is cloud based so it will work with any Sensibo product. Quote Link to comment Share on other sites More sharing options...
alanchow Posted October 7, 2021 Author Share Posted October 7, 2021 We have had lots of requests for air filtration and also air quality detection over the past few years and i am proud to announce that today we have released our Sensibo Pure driver for Control4. Sensibo Pure is the world's most advanced smart air purifier that will keep you healthy and energized. Sensibo Pure has a built in sensor measuring your indoor air quality providing feedback on good, modern or unhealthy air. It is equipped with specially designed strong HEPA & Carbon filters, removes particles as small as 0.1um and protects against viruses, bacteria, dust, smoke, bad odors. The driver is bundled with our existing Sensibo Air / Sky driver for Control4 meaning existing customers don't need to purchase an additional licence The Sensibo Air / Sky driver makes your existing air conditioner smart and connected! Sensibo Air / Sky is an external device that you pair your remote controlled air conditioner with. Sensibo will work with the majority of infra-red based HVAC systems whether it is a mini split, window AC, ductless, portable, heat pump and even central air conditioners. The Chowmain driver for Sensibo communicates to Sensibo devices via the Sensibo Cloud API. For Air & Sky models it enables full two way control and feedback over room temperature, humidity, setpoints, hvac mode and fan speeds. The driver will even configure itself based on the HVAC system capabilities. For the Pure model it will allow you to control on/off, fan speeds, LED lights and provide you with air quality and filter feedback. msgreenf 1 Quote Link to comment Share on other sites More sharing options...
Jimnaldo Posted January 21, 2022 Share Posted January 21, 2022 Hi, i'm using Sensibo air with the room sensors, but in control4 i don't get the tempature from the room sensors only from the sensibo air itself. Could you please advise? Quote Link to comment Share on other sites More sharing options...
alanchow Posted January 24, 2022 Author Share Posted January 24, 2022 On 1/21/2022 at 9:41 PM, Jimnaldo said: Hi, i'm using Sensibo air with the room sensors, but in control4 i don't get the tempature from the room sensors only from the sensibo air itself. Could you please advise? The driver does not support the Room Sensors. We'll look at adding this in the future. Quote Link to comment Share on other sites More sharing options...
foxav Posted February 6, 2022 Share Posted February 6, 2022 Do you have to subscribe to the sensibo premium monthly service for this driver to work? Quote Link to comment Share on other sites More sharing options...
alanchow Posted February 6, 2022 Author Share Posted February 6, 2022 2 hours ago, foxav said: Do you have to subscribe to the sensibo premium monthly service for this driver to work? no you do not foxav 1 Quote Link to comment Share on other sites More sharing options...
Abdul Mumeet Posted October 4, 2022 Share Posted October 4, 2022 in one of our site we have Core-3 Controller, and we are planning to purchase the Driver; so it will work in Karachi Pakistan region ? Quote Link to comment Share on other sites More sharing options...
Adamc1303 Posted November 1, 2022 Share Posted November 1, 2022 I just had my dealer download and add this to my system. We are currently on the trial run but I would love for it to work. I aM seeing two issues so far. 1 - It does not allow me to change from Celsius to Farenheit. I click on it to make the change but it will not do it. 2 - It is not allowing me to turn the unit on or off. It’s just showing me how it it set. When I click nothing happens, which leads me to believe that the scheduling from C4 will not work as well and rather only directly from Sensibo. Is this something that my dealer did wrong or do the drivers need an update? Thanks, Adam Quote Link to comment Share on other sites More sharing options...
Amr Posted November 1, 2022 Share Posted November 1, 2022 19 hours ago, Adamc1303 said: I just had my dealer download and add this to my system. We are currently on the trial run but I would love for it to work. I aM seeing two issues so far. 1 - It does not allow me to change from Celsius to Farenheit. I click on it to make the change but it will not do it. 2 - It is not allowing me to turn the unit on or off. It’s just showing me how it it set. When I click nothing happens, which leads me to believe that the scheduling from C4 will not work as well and rather only directly from Sensibo. Is this something that my dealer did wrong or do the drivers need an update? Thanks, Adam Some of your issues I don’t experience, Are u on OS3? I have zero issues with the driver, it’s a solid driver, absolutely behaves like 2-ways driver, even when we use the original remote it reports back to C4, so I advise your to review the integration guide and make sure the steps are fully followed Quote Link to comment Share on other sites More sharing options...
Adamc1303 Posted November 1, 2022 Share Posted November 1, 2022 Yes OS3 Quote Link to comment Share on other sites More sharing options...
Amr Posted November 1, 2022 Share Posted November 1, 2022 Just now, Adamc1303 said: Yes OS3 So that’s weird then, this has been excellent since OS2 days! Quote Link to comment Share on other sites More sharing options...
Adamc1303 Posted November 1, 2022 Share Posted November 1, 2022 Did it work during the free trial period? Does it have limited functionality during the trial period? Quote Link to comment Share on other sites More sharing options...
Cyknight Posted November 2, 2022 Share Posted November 2, 2022 To be clear - Chowmain Trial drivers do not have functional limits - they merely stop working after the trial period Andrew luecke 1 Quote Link to comment Share on other sites More sharing options...
Amr Posted November 3, 2022 Share Posted November 3, 2022 Fully functional for 90 days after that it dies! Quote Link to comment Share on other sites More sharing options...
alanchow Posted November 6, 2022 Author Share Posted November 6, 2022 On 11/1/2022 at 11:51 AM, Adamc1303 said: I just had my dealer download and add this to my system. We are currently on the trial run but I would love for it to work. I aM seeing two issues so far. 1 - It does not allow me to change from Celsius to Farenheit. I click on it to make the change but it will not do it. 2 - It is not allowing me to turn the unit on or off. It’s just showing me how it it set. When I click nothing happens, which leads me to believe that the scheduling from C4 will not work as well and rather only directly from Sensibo. Is this something that my dealer did wrong or do the drivers need an update? Thanks, Adam Please get your dealer to contact us for support and we will assist. https://chowmain.software/for-integrators/technical-support On 11/2/2022 at 7:33 AM, Adamc1303 said: Did it work during the free trial period? Does it have limited functionality during the trial period? The driver does not have any limitations during the 90 day trial. Quote Link to comment Share on other sites More sharing options...
tonysss13 Posted July 4, 2023 Share Posted July 4, 2023 Have been using this driver for my LG units. Works really well however for some reason some fan speeds are missing on the C4 app that are showing on the Sensibo App Also the text is a bit poorly formatted on the C4 app One thing that would be really handy for those of us with the LG units in the bedroom is to have the light on / off function accessible from C4, as there is no way to permanently switch it off and iluminates the room works great though will be buying more sensibos for my other units Quote Link to comment Share on other sites More sharing options...
alanchow Posted July 4, 2023 Author Share Posted July 4, 2023 7 hours ago, tonysss13 said: Have been using this driver for my LG units. Works really well however for some reason some fan speeds are missing on the C4 app that are showing on the Sensibo App Also the text is a bit poorly formatted on the C4 app One thing that would be really handy for those of us with the LG units in the bedroom is to have the light on / off function accessible from C4, as there is no way to permanently switch it off and iluminates the room works great though will be buying more sensibos for my other units We automatically import in the HVAC and FAN modes into Control4. Control4 by default has known HVAC and FAN modes. When we issue a known mode it will automatically format it and sometimes applies icons to them as well hence why LOW and AUTO convert to Low and Auto. In regards to light on / off functions this is not part of the API so we have no control over it. tonysss13 1 Quote Link to comment Share on other sites More sharing options...
tonysss13 Posted July 5, 2023 Share Posted July 5, 2023 thanks for clarifying Alan On the top of the driver there is a "use temperature sensor" option however it's greyed out. is there any way of enabling this as it would be handy to use my main room stats Quote Link to comment Share on other sites More sharing options...
alanchow Posted July 5, 2023 Author Share Posted July 5, 2023 11 hours ago, tonysss13 said: thanks for clarifying Alan On the top of the driver there is a "use temperature sensor" option however it's greyed out. is there any way of enabling this as it would be handy to use my main room stats You cannot feed data into sensibo. The driver will however pick up data from senisibos own room sensors. So if you have one set up then the driver will automatically pull the data in. No setup required on control,4. tonysss13 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.