electrician9421 Posted August 16, 2016 Share Posted August 16, 2016 I'm on a project that has multiple rooms with multiple tvs in them. My question is how do I set them up as end points? Do I create a separate room for each tv? Link to comment Share on other sites More sharing options...
ichbinbose Posted August 16, 2016 Share Posted August 16, 2016 Each tv is its own room Sent from my SM-N910T using Tapatalk Link to comment Share on other sites More sharing options...
duck_man Posted August 18, 2016 Share Posted August 18, 2016 You don't need to do it that way. You can use custom buttons on your GUIs to control multiple screens and there are 3rd party drivers for multiple TVs. Adding rooms for extra TVs is clunky. Link to comment Share on other sites More sharing options...
knowitall Posted August 18, 2016 Share Posted August 18, 2016 Do you have a video matrix going in the project? Really nice driver called multi screen wall. Link to comment Share on other sites More sharing options...
ichbinbose Posted August 18, 2016 Share Posted August 18, 2016 You don't need to do it that way. You can use custom buttons on your GUIs to control multiple screens and there are 3rd party drivers for multiple TVs. Adding rooms for extra TVs is clunky. Custom buttons can only get you so far, but it could be enough for the op depending on how much control he wants. Sent from my SM-N910T using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.