alanchow Posted July 18, 2016 Share Posted July 18, 2016 (edited) Chowmain - Big Ass Fans / Big Ass Lights Driver The Chowmain Big Ass Fans Driver for Control4 allows integration of the IP controllable Big Ass Fans and Big Ass Lights into Control4 allowing full 2 way multispeed fan and multi level lighting control over your home. Integration into Control4 allows control from a single point using Control4's touchscreens, mobile applications, keypads, handheld remote controls and cloud based 4sight remote monitoring and control service. On top of that it exposes control over the Haiku products in the Control4 ecosystem to provide interaction from other devices in the home. From turning off your fans and lights when you arm your security system to automatically turning them on when it detects you are at home and if the temperature is at an uncomfortable level integration provides you with so many different solutions to make your lifestyle that much easier. General Features Automatically Discover and Manage Big Ass Fan Devices on your network using our new Big Ass Fans V2 Agent Instantaneous Feedback Wide variety of read/write variables for feedback and advanced programming Light Features Automatic Naming of Lights Auto mapped light levels (Control4 has 0-100 where Haiku has 0-16) Support for Advanced Lighting Scenes Two way feedback – Level, Device Name, Device MAC Address, Device IP Address Programming Commands OS 3.3.0 CCT / White Temperature Light Color Wheel Support BUTTON_LINK support for brightness and CCT control by 3rd party devices Fan Features 7 Speed Control Automatic naming of Fans Assign Preset Speed (On speed when toggled) Two way feedback – Speed, Device Name, Device MAC Address, Device IP Address Programming Commands - Whoosh Mode, Fan Auto, Fan Direction BUTTON_LINK support for Toggle and cycle up/down support by 3rd party devices Sensors Occupancy/Motion Sensor Support and bindings to detect if a room is occupied or not Temperature and Humidity Sensor Support FAQ Which Big Ass Fan Products are supported by this driver? At this time, the following products are supported: Haiku (H and I Series) Haiku L Haiku Light i6 es6 If its supported by the Big Ass Fans mobile app, it's probably supported by our driver. Where is the Fan in Control4's interface? Fan control is available from Control4's lighting page How come the dimmer level changes slightly when i set a level? Many light only have dim levels of 0-16, which may cause the level changes to vary I notice that the driver automatically renames. What if i want to name it myself? Adjust the Auto Rename Property on the fan. How do i use whoosh, fan direction or the automatic settings? These functions are programmed as one-way commands in the fan / light driver's programming commands. You should tie these into experience buttons, schedules or other event based programming. What Control4 OS is required for this driver? OS 3.3.0 or above is required for our Big Ass Fans V2 driver. For Legacy systems, V1 may still be used, but requires older firmware and supports limited hardware My Fans were working correctly in V1, however, the fans do not operate in V2 You must upgrade your mobile app from the original Haiku App to the new Big Ass fans app and update the firmware. V2 requires updated firmware for operation. V1 does not require updated firmware, but it does not support all of the features or hardware of V2. I have functionality I want to use which isn't available as a command or binding We expose lots of functionality as variables which you can modify. If there are variables which you can't write to, or if you want functionality which is better handled in another way, let us know. Do you offer any other cool drivers? Control4 is a major part of our business. We develop new drivers all the time. You can see all of our drivers on our website (http://www.chowmainsoft.com). Sign up to our newsletter to get notified when new drivers out. I want to try this driver out before buying it? All Chowmain drivers for Control4 come with a 90 day trial. Where can i find out more? You can find out more about the driver from the following link. https://chowmain.software/drivers/control4-big-ass-fans-haiku Edited July 11, 2022 by alanchow vstar, StroTek LLC, WaltersRS and 1 other 4 Quote Link to comment Share on other sites More sharing options...
eddy.trochez Posted July 19, 2016 Share Posted July 19, 2016 Nice job Alan! Quote Link to comment Share on other sites More sharing options...
LAPVI Posted February 7, 2019 Share Posted February 7, 2019 Does this driver work with the outdoor version of the BAF Haiku fans that do not have the "SenseMe" technology and do not work with the Haiku App? I'm getting ready to order 6 outdoor fans, and I'm curious how C4 can control it if the only current BAF solution for the fans is their remote control. If the driver doesn't work with the standard outdoor version of these fans, is there any other suggestion for a solution? I know they offer a 0-10V version of the fans, but I wasn't if C4 had a way to control that. thanks for any help or advice! Lee Quote Link to comment Share on other sites More sharing options...
RyanE Posted February 7, 2019 Share Posted February 7, 2019 Just FYI, Alan is at ISE in Amsterdam, which ends tomorrow (but I believe he will be doing some travel in Europe afterwards), so he may be a bit slow to answer any questions regarding his drivers, etc. RyanE Quote Link to comment Share on other sites More sharing options...
lippavisual Posted February 7, 2019 Share Posted February 7, 2019 If you can't control the fan with the BAF app, then his driver won't work. C4's Fan Controller also does not work 0-10v fans either, they use standard 120V for "dumb", pullchain motors. Not DC motors either, it's all AC motors. Take a look at Fanimation. I've purchased several that have the modern/contempory style like BAF, put still have the 3-speed AC motors compatible with the C4 Fan control. Quote Link to comment Share on other sites More sharing options...
LAPVI Posted February 11, 2019 Share Posted February 11, 2019 On 2/7/2019 at 4:37 PM, lippavisual said: If you can't control the fan with the BAF app, then his driver won't work. C4's Fan Controller also does not work 0-10v fans either, they use standard 120V for "dumb", pullchain motors. Not DC motors either, it's all AC motors. Take a look at Fanimation. I've purchased several that have the modern/contempory style like BAF, put still have the 3-speed AC motors compatible with the C4 Fan control. Thanks lippavisual! I know you said that C4's Fan Controller doesn't work with the 0-10v fans, but do you know if a standard C4 dimmer would work in lieu of a fan controller? Also, I appreciate the tip look into Fanimation. I'm also looking into them now. I liked a few of them but they ended up having DC motors so I'm looking into the AC options now. Quote Link to comment Share on other sites More sharing options...
lippavisual Posted February 11, 2019 Share Posted February 11, 2019 For C4, about the only thing that would work other than the fan controller, would be a switch (ie: on/off). Just about most of the Fanimation fans come with 2-3 different skus for motor type per fan. The ones I’ve purchased had 3. 0-10v dc without wireless remote, 0-10v dc with remote and if available, 3 speed AC. Something along those lines, don’t exactly remember You could always call them to see if they will put an AC motor in the style fan you want. Wouldn’t hurt to try. Quote Link to comment Share on other sites More sharing options...
alanchow Posted December 30, 2019 Author Share Posted December 30, 2019 Some people were complaining about how the fan comes up under lighting. Unfortunately this is a Control4 problem which we can't resolve. Instead what we have done is create a experience button which allows you to select any fan proxy and allow for 3 speed fan control with feedback. It will auto map the speeds based on capabilties of the fan proxy driver selected. Mapping will be lowest (1), highest (depending on capabilities) and will the following math for the medium speed (highest / 2 rounded up). It is a free driver and is bundled with this driver. Quote Link to comment Share on other sites More sharing options...
alanchow Posted July 14, 2020 Author Share Posted July 14, 2020 UPDATE Updated to implement Whoosh, Direction and Auto commands into the programming tab for fans and lights. Quote Link to comment Share on other sites More sharing options...
alanchow Posted July 16, 2020 Author Share Posted July 16, 2020 UPDATE Added smart mode programming with heating, cooling and off values. Tie this to Heating, Cooling and Off HVAC modes to assist distribute of hot or cold air from your HVAC system. Quote Link to comment Share on other sites More sharing options...
wookert Posted July 23, 2020 Share Posted July 23, 2020 Alan, does this module work with the ISIS fan? Quote Link to comment Share on other sites More sharing options...
alanchow Posted July 24, 2020 Author Share Posted July 24, 2020 14 hours ago, wookert said: Alan, does this module work with the ISIS fan? I don't know. If you have one you can try out our driver for a period of 90 days prior to licence purchase. Quote Link to comment Share on other sites More sharing options...
Lerysg Posted March 11, 2021 Share Posted March 11, 2021 Bigass i6 Compatibility???? Quote Link to comment Share on other sites More sharing options...
alanchow Posted March 11, 2021 Author Share Posted March 11, 2021 1 hour ago, Lerysg said: Bigass i6 Compatibility???? No only haiku Quote Link to comment Share on other sites More sharing options...
Christian87n Posted June 10, 2021 Share Posted June 10, 2021 Does the driver track the power state of the fan and light? I programmed the LEDs to turn on anytime either is on but if they turn on on their own (smart mode/motion) the LEDs don’t change. Quote Link to comment Share on other sites More sharing options...
alanchow Posted June 12, 2021 Author Share Posted June 12, 2021 On 6/11/2021 at 7:34 AM, Christian87n said: Does the driver track the power state of the fan and light? I programmed the LEDs to turn on anytime either is on but if they turn on on their own (smart mode/motion) the LEDs don’t change. Yes the driver provides bi-directional feedback. Note that it is polled so it won't update until the next poll interval (unless the command is initiated by Control4 in which case its instant). Quote Link to comment Share on other sites More sharing options...
Christian87n Posted June 12, 2021 Share Posted June 12, 2021 2 hours ago, alanchow said: Yes the driver provides bi-directional feedback. Note that it is polled so it won't update until the next poll interval (unless the command is initiated by Control4 in which case its instant). I changed the polling time to 10 seconds but noticed it wouldn’t change the LED status or the status within the C4 app. Any future updates to include Sleep Mode? Also, any programming instructions to allow for lowering or raising light intensity like what’s allowed for the fan speed? Quote Link to comment Share on other sites More sharing options...
alanchow Posted June 14, 2021 Author Share Posted June 14, 2021 You'll need to submit a helpdesk ticket for us to troubleshoot further with logs and probably remote access details to your system. https://www.chowmainsoft.com/support We don't have sleep mode implemented (or know how to do it). The API for lights only give us the details on how to set the value. As such you will have to do your own programming to do raising and lowering. Christian87n 1 Quote Link to comment Share on other sites More sharing options...
Paul S Posted April 20, 2022 Share Posted April 20, 2022 Hi I know that Chowmainsoft are working on an driver update to make it compatible with the recent Haiku firmware update, but wondering if the new driver would also provide compatibility with the i6 and es6 models. Many thanks Paul Quote Link to comment Share on other sites More sharing options...
alanchow Posted April 27, 2022 Author Share Posted April 27, 2022 On 4/20/2022 at 5:51 PM, Paul S said: Hi I know that Chowmainsoft are working on an driver update to make it compatible with the recent Haiku firmware update, but wondering if the new driver would also provide compatibility with the i6 and es6 models. Many thanks Paul Its not a driver update. Its a total rewrite. This means it won't be upgradable. Once we have written the new driver it'll work with the i6 and es6 as well. Quote Link to comment Share on other sites More sharing options...
Paul S Posted June 8, 2022 Share Posted June 8, 2022 On 4/27/2022 at 4:06 AM, alanchow said: Its not a driver update. Its a total rewrite. This means it won't be upgradable. Once we have written the new driver it'll work with the i6 and es6 as well. Hi Alan I know in the email that was sent out, it was hoped that the new driver would be available in July. Just wondering if development was going to plan and if July was still on track. Just trying to work out if I should buy one of the new fans for my home that I could install in August. many thanks Paul Quote Link to comment Share on other sites More sharing options...
alanchow Posted June 9, 2022 Author Share Posted June 9, 2022 17 hours ago, Paul S said: Hi Alan I know in the email that was sent out, it was hoped that the new driver would be available in July. Just wondering if development was going to plan and if July was still on track. Just trying to work out if I should buy one of the new fans for my home that I could install in August. many thanks Paul We are working on the driver but it may be delayed slightly due to other projects. Fans manufacturered from July onwards cannot be downgraded. Fans previous to that can be. Quote Link to comment Share on other sites More sharing options...
alanchow Posted July 11, 2022 Author Share Posted July 11, 2022 Hi everyone, We have now released the new Big Ass Fans driver for Control4 which supports the new Big Ass Fans API. Developed from the ground up by our very talented @Andrew luecke this driver supports all IP controlled fans including Haiku (firmware version 3+), ES6 and i6 fans with the following functionality. Fan Speed Control Preset Speed (On speed when toggled) Whoosh, Fan Direction Light Dimming Light Color Temperature Adjustment. Temperature & Humidity Feedback Occupancy Sensor Support + more Existing Big Ass Fans Haiku Control4 driver customers can install this driver at no additional charge. Note customers must upgrade to the latest version of the firmware for this new driver to operate. Big thank you to Big Ass Fans for their support on this project. For more information please see link below. https://chowmain.software/drivers/control4-big-ass-fans-haiku Andrew luecke and Christian87n 2 Quote Link to comment Share on other sites More sharing options...
Sukmano Posted August 11, 2022 Share Posted August 11, 2022 On 12/31/2019 at 6:59 AM, alanchow said: Some people were complaining about how the fan comes up under lighting. Unfortunately this is a Control4 problem which we can't resolve. Instead what we have done is create a experience button which allows you to select any fan proxy and allow for 3 speed fan control with feedback. It will auto map the speeds based on capabilties of the fan proxy driver selected. Mapping will be lowest (1), highest (depending on capabilities) and will the following math for the medium speed (highest / 2 rounded up). It is a free driver and is bundled with this driver. Hi, may I know what is the driver's name. Thank you. Quote Link to comment Share on other sites More sharing options...
alanchow Posted August 11, 2022 Author Share Posted August 11, 2022 10 hours ago, Sukmano said: Hi, may I know what is the driver's name. Thank you. For ease here it is uibutton_chowmain_fan_speed.c4z Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.