Nehsmit Posted April 16, 2016 Share Posted April 16, 2016 Hey all, I'm trying to program my theater for various sources. I've done programming and I can get everything on, just can't get the actual source to project. The projector is on and set to the right hdmi input but the source won't display the source. I also can hear the audio. Here are the involved components: Marantz 7009 output bluray Source (dvd, cable box, etc) Matrix switcher Projector Attached is the programming. Can someone please help. Thanks in advance Link to comment Share on other sites More sharing options...
jfh Posted April 17, 2016 Share Posted April 17, 2016 If your video sources are set up correctly, you shouldn't need to do all this. Just select the source you want for the room. Link to comment Share on other sites More sharing options...
msgreenf Posted April 17, 2016 Share Posted April 17, 2016 Sounds like bindings are missing Sent from my Nexus 5X using Tapatalk Link to comment Share on other sites More sharing options...
Nehsmit Posted April 18, 2016 Author Share Posted April 18, 2016 Thanks all for your help. Figured out the problem. Needed to select the output on the marantz. Set to auto as I'm only using one out to the projector and works perfect. Link to comment Share on other sites More sharing options...
Max Stout Posted April 22, 2016 Share Posted April 22, 2016 This is programmed wrong. Should just select the Video Source in the that room. No need to do all that madness....I know you said you figured it out but, I would redo the programming. Link to comment Share on other sites More sharing options...
ILoveC4 Posted April 23, 2016 Share Posted April 23, 2016 Yeah, SockMonkey3000 is right. You're not programming macros here. C4 makes this much simpler. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.