SHar Posted January 28, 2016 Share Posted January 28, 2016 I am using composer HE 2.8. I have a 6 button keypad, button 3 is going to be my audio. Here is what I want to do: 1 press = Pandora, Station 1 (running off my c4 controller) 2 press = wireless bridge press and hold = audio off Can anyway post a picture of the code they use to select Pandora, login to Pandora, and set to a station? Link to comment Share on other sites More sharing options...
Cyknight Posted January 28, 2016 Share Posted January 28, 2016 Under programming, go to PANDORA driver, it has DEVICE_SPECIFIC commands, in there you can select station and rooms you want to start it in (scroll to the right until you see the little box with [...]) Link to comment Share on other sites More sharing options...
SHar Posted February 5, 2016 Author Share Posted February 5, 2016 do you by chance have the code sequencing that you could post or screen shot. Sorry still a newbie to Composer. Trying to learn. Thanks. Link to comment Share on other sites More sharing options...
msgreenf Posted February 6, 2016 Share Posted February 6, 2016 On the left select the button. On the right select Pandora and then it's all right there Sent from my Nexus 5X using Tapatalk Link to comment Share on other sites More sharing options...
jfh Posted February 6, 2016 Share Posted February 6, 2016 Also, you don't have to program logging into Pandora. That should already be set at the driver level under Monitoring. If not, go to the Actions page and hit the login button. (This should be a ne time event, but there was a bug introduced in 2.8.0 where sometimes after a controller reboot the session is not re-established) Link to comment Share on other sites More sharing options...
Matt Lowe Posted February 6, 2016 Share Posted February 6, 2016 you will need to select a button on the left side of the programming tab(device events) on the right side find the pandora driver (device actions) programming will need to look like this on button press select pandora XXX station in XXXX room On double tab select music bridge in XXXX room on Triple tap Room Off or the more intuitive On button press If room is selected on music bridge turn room off stop If room is selected digital media select music bridge in XXXX Room stop select Pandora XXXXX station in XXX room Link to comment Share on other sites More sharing options...
SHar Posted February 9, 2016 Author Share Posted February 9, 2016 Thanks all. I have Pandora station 1 on single tap. Pandora station 2 on double tap. Wireless Bridge on triple tap. Is there a way to do a press and hold to turn music only off? Link to comment Share on other sites More sharing options...
Matt Lowe Posted February 9, 2016 Share Posted February 9, 2016 Best i can think of.on press start a 5 second Timer or however long you want. On release check if the Timer is running stop programming if not room off. Link to comment Share on other sites More sharing options...
SHar Posted February 9, 2016 Author Share Posted February 9, 2016 Matt, Is there a way to turn music only off or do you have to turn the room off (meaning lights only)? Thank you for your help! Link to comment Share on other sites More sharing options...
Cyknight Posted February 9, 2016 Share Posted February 9, 2016 The 'room off' programming command turns off only audio/video, not lights. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.