Cyknight Posted January 28, 2016 Share Posted January 28, 2016 FYI, the new DSC security drivers are now available for use via Control4. NOTE that for the older POWERPC series, a swap needs to be mad to an it-230 (not the older it-100) which also means a RS422 to 232 adapter will be needed. The driver for the DSC NEO unit (using the TL-280) is able to do rs232 (again using adapter as above) or IP. Before jumping the gun - please note that there may be version requirements for your panel (PC series in particular) to be able to use the new modules. Oh and don't ask about other brands/Honeywell - I don't have the answer on when Link to comment Share on other sites More sharing options...
control4user007 Posted January 28, 2016 Share Posted January 28, 2016 Such a tease for the honeywell guys Link to comment Share on other sites More sharing options...
Bullseye Posted January 28, 2016 Share Posted January 28, 2016 32 minutes ago, control4user007 said: Such a tease for the honeywell guys +2 Link to comment Share on other sites More sharing options...
RobbieF Posted January 28, 2016 Share Posted January 28, 2016 damn... just bought the Domosapians a few days ago....... Link to comment Share on other sites More sharing options...
Cyknight Posted January 28, 2016 Author Share Posted January 28, 2016 To be fair, by the time you've bought a IT-230 and the converter, for existing setups it may be cheaper to use that driver instead (easier if nothing else). Link to comment Share on other sites More sharing options...
c4toys Posted January 29, 2016 Share Posted January 29, 2016 cy, what converter are you speaking of? rs422 to RS232? I just had a IT-100 die and picked up the IT-230 today. I see that the IT-230 does not have rs232 plug in port. Looks like screw down terminals. Link to comment Share on other sites More sharing options...
Cyknight Posted January 29, 2016 Author Share Posted January 29, 2016 yes 422 to 232. Notre that AFAIK at this point in time you'll need a POWERED converter (not port-powered) Link to comment Share on other sites More sharing options...
THawes Posted January 29, 2016 Share Posted January 29, 2016 This was great timing - I am just about that the point where I needed to decide which module to buy for the panel. I guess it'll be the IT-230! Link to comment Share on other sites More sharing options...
THawes Posted January 29, 2016 Share Posted January 29, 2016 I have an IT-230 on the way. Does anyone have any particular RS422 to RS232 adapters that they've had good luck with? I know powered adapters were mentioned and this one popped up in a few different places: http://www.amazon.com/UT-202-Port-powered-RS-232-RS-422-Mini-size/dp/B00KG4H40O/ Link to comment Share on other sites More sharing options...
mallom Posted January 29, 2016 Share Posted January 29, 2016 Security Drivers DSC IT230(Beta) - Control4 - Support - Powerseries panels v4.5 or higher - Requires a RS422 to RS232 converter, we have used one from B&B Electronics(4WSD9TB) in our test and development DSC TL280(Beta) - Control4 - Support - NEO panels using any of the following communication boards, TL280, TL280R, TL2803G, TL2803GR - The initial release of these boards have often required a firmware update in order to communicate correctly, ensure that your device has version 4.1 - If serials communication is desired it will require a RS422 to RS232 converter, we have used one from B&B Electronics(4WSD9TB) in our test and development Link to comment Share on other sites More sharing options...
mallom Posted January 29, 2016 Share Posted January 29, 2016 I bought the same converter but it did not work for me... IT-230 flashes but it would not communicate with the controller. I will try again this weekend using a power supply and report if that solves the problem. Link to comment Share on other sites More sharing options...
THawes Posted January 29, 2016 Share Posted January 29, 2016 8 minutes ago, mallom said: I bought the same converter but it did not work for me... IT-230 flashes but it would not communicate with the controller. I will try again this weekend using a power supply and report if that solves the problem. Yeah, I am looking for an externally-powered one now that has decent reviews. Link to comment Share on other sites More sharing options...
c4toys Posted January 29, 2016 Share Posted January 29, 2016 can you share which convert your looking or one confirmed to work? Link to comment Share on other sites More sharing options...
mallom Posted January 29, 2016 Share Posted January 29, 2016 2 hours ago, 2kooltoys said: can you share which convert your looking or one confirmed to work? - Requires a RS422 to RS232 converter, we have used one from B&B Electronics(4WSD9TB) in our test and development Link to comment Share on other sites More sharing options...
THawes Posted February 4, 2016 Share Posted February 4, 2016 On 1/29/2016 at 11:07 AM, mallom said: I bought the same converter but it did not work for me... IT-230 flashes but it would not communicate with the controller. I will try again this weekend using a power supply and report if that solves the problem. Did you have a chance to give the adapter (4WSD9TB) another try over the weekend? My IT-230 arrived, and now I just need to decide on an RS422-232 adapter. I'll probably just order the same one, given that it is the recommended one. Just want to make sure there aren't some looming issues with it first! Link to comment Share on other sites More sharing options...
mallom Posted February 4, 2016 Share Posted February 4, 2016 2 hours ago, THawes said: Did you have a chance to give the adapter (4WSD9TB) another try over the weekend? My IT-230 arrived, and now I just need to decide on an RS422-232 adapter. I'll probably just order the same one, given that it is the recommended one. Just want to make sure there aren't some looming issues with it first! Not yet. There is a C4 KB that they will release with the instructions on how to set it up. I am just waiting for that Link to comment Share on other sites More sharing options...
THawes Posted February 4, 2016 Share Posted February 4, 2016 7 minutes ago, mallom said: Not yet. There is a C4 KB that they will release with the instructions on how to set it up. I am just waiting for that Ah, got it - thanks! Link to comment Share on other sites More sharing options...
THawes Posted March 3, 2016 Share Posted March 3, 2016 On 2/4/2016 at 9:43 AM, mallom said: There is a C4 KB that they will release with the instructions on how to set it up. I am just waiting for that The KB article was finally published a couple of days ago. Bought a 4WSD9TB today and I'll get it hooked up next week when it arrives. Link to comment Share on other sites More sharing options...
mallom Posted March 4, 2016 Share Posted March 4, 2016 The KB article was finally published a couple of days ago. Bought a 4WSD9TB today and I'll get it hooked up next week when it arrives. I still dont know if we have to power the converter or not. Keep us updated. Link to comment Share on other sites More sharing options...
JP Rizal Posted March 4, 2016 Share Posted March 4, 2016 IF you have a currently working IT100 DSC driver in the 2.81 OS, is it really worth upgrading to the 230 or the 280 with the adapters power or not powered. Will it actually add more functionality or just a shiny new GUI? Link to comment Share on other sites More sharing options...
Cyknight Posted March 4, 2016 Author Share Posted March 4, 2016 Well you can't use the 280 - that's for NEO panels. There's certainly some new functionality, and yes it's a much nicer interface. If you have an existing 100 and it's working fine, get the driver from houselogix, it'll be about the same cost and a lot less hassle. Link to comment Share on other sites More sharing options...
THawes Posted March 4, 2016 Share Posted March 4, 2016 Yeah, if you must have the new UI and functionality but already have an integration with the IT-100, I would just go with the Houselogix driver. I had not yet tied my alarm panel into my Control4 system (I just moved and hadn't gotten around to it), so IT-230 was the logical choice for me. Link to comment Share on other sites More sharing options...
THawes Posted March 8, 2016 Share Posted March 8, 2016 On 3/4/2016 at 8:05 PM, mallom said: I still dont know if we have to power the converter or not. Keep us updated. I'm thinking it needs to be powered. I hooked it up yesterday and wasn't getting any communication through it. Time to track down a 12v 2.5mm power adapter! Link to comment Share on other sites More sharing options...
mallom Posted March 8, 2016 Share Posted March 8, 2016 I'm thinking it needs to be powered. I hooked it up yesterday and wasn't getting any communication through it. Time to track down a 12v 2.5mm power adapter! I bought the power adapter but I also moved to a new home and havent setup the system yet Please let us know if the power adapter solves the problem. Thanks Link to comment Share on other sites More sharing options...
THawes Posted March 9, 2016 Share Posted March 9, 2016 17 hours ago, mallom said: I bought the power adapter but I also moved to a new home and havent setup the system yet Where did you order the power adapter from? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.