TEKSTEIN Posted December 20, 2015 Share Posted December 20, 2015 I recently switched to Centurylink Prism TV and I am having some issues with the remote control programming. Does anyone know if there is a driver for any of the receiver boxes listed below other than generic ones. The Motorola and the Cisco units don't really have too many issues (what I mean by that is that most of the buttons do what the corresponding buttons do from the remotes supplied by century link). The pace unit seems to have the biggest issue. The channel up and down work but the "ok" and "arrow pad" doesn't respond. You can see on the IR that a signal is being sent, but nothing happens. We have tried learning the code from the remotes but from what I under stand there is not a clear signal from remote. I tried find a hexadecimal code for the units but everything I'm finding is for order units. Any help would greatly appreciate! Thanks ! Motorola model VIP1200Cisco model ISB7005Pace model IPH8005 Link to comment Share on other sites More sharing options...
cybuch Posted December 20, 2015 Share Posted December 20, 2015 I created a simple IR driver if you want it Link to comment Share on other sites More sharing options...
gmontgomery Posted February 15, 2016 Share Posted February 15, 2016 I'd be interested in the Prism Centurylink Driver if you have one available. It's becoming popular in my area. The customers I've talked to have the Pace box it looks like. Greg Link to comment Share on other sites More sharing options...
Matt Lowe Posted February 16, 2016 Share Posted February 16, 2016 there are drivers in the online database just need to use whats there Link to comment Share on other sites More sharing options...
gmontgomery Posted February 16, 2016 Share Posted February 16, 2016 Is it the UPC Pace driver? The Pace driver is old enough that it doesn't have HDMI, so I assume that's not it. I didn't seen anything specifically for Centurylink or Prism in the database. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.