kajphotos Posted October 15, 2015 Share Posted October 15, 2015 For anyone updating to 2.8 please keep us posted as far as compatibility or any issues Link to comment Share on other sites More sharing options...
C4RVA Posted October 15, 2015 Share Posted October 15, 2015 My myhome app updated and I lost the text display for my concord 4. Havent updated to 2.8 on the controller yet. Link to comment Share on other sites More sharing options...
kajphotos Posted October 15, 2015 Author Share Posted October 15, 2015 You should get that back as soon as you update your system as concord work in tandem with the app Link to comment Share on other sites More sharing options...
Cyknight Posted October 15, 2015 Share Posted October 15, 2015 I do not know the current state of all drivers - but Concord will get a new driver that will use the new interface. Compatibility as such is not limited (no lost devices etc), but be aware that some features of 2.8 (Shairbridge for example) require you are running an HC800 Link to comment Share on other sites More sharing options...
FLA Posted October 15, 2015 Share Posted October 15, 2015 Probably a lame question but I have to learn sometime. Will my system automatically update to 2.8 or does it have to be initiated by my dealer? How about my apps? Link to comment Share on other sites More sharing options...
Gary Leeds UK Posted October 15, 2015 Share Posted October 15, 2015 You need a dealer to update your controller Link to comment Share on other sites More sharing options...
kajphotos Posted October 15, 2015 Author Share Posted October 15, 2015 My dealer updated me last night to 2.8 however I don't see Pandora or shearbridge I do have a hc800 just wondering Link to comment Share on other sites More sharing options...
alanchow Posted October 15, 2015 Share Posted October 15, 2015 Your dealer needs to add it in. It's only automatically added in new projects Link to comment Share on other sites More sharing options...
turls Posted October 15, 2015 Share Posted October 15, 2015 Nothing of note here so far, except this: you are supposed to get the new Security UI if you have a supported system (it will use the new proxy). I have Concord 4 and still have the old UI. I see no new drivers to load in search. I would normally try just deleting the driver and re-installing--but not going to do that with security. Anybody else? Link to comment Share on other sites More sharing options...
Matt Posted October 15, 2015 Share Posted October 15, 2015 Nothing of note here so far, except this: you are supposed to get the new Security UI if you have a supported system (it will use the new proxy). I have Concord 4 and still have the old UI. I see no new drivers to load in search. I would normally try just deleting the driver and re-installing--but not going to do that with security. Anybody else? I’ll message the Security Team. I am not finding it either. It does require you to remove and re-add/re-configure the new driver once available. Please note that your firmware must be on 04.81 or greater. Matt Link to comment Share on other sites More sharing options...
kajphotos Posted October 15, 2015 Author Share Posted October 15, 2015 Even the shearbridge feature ? Link to comment Share on other sites More sharing options...
Matt Posted October 15, 2015 Share Posted October 15, 2015 Even the shearbridge feature ? shairbridge is available inside composer 2.8.0. Matt Link to comment Share on other sites More sharing options...
Bullseye Posted October 15, 2015 Share Posted October 15, 2015 Does the Ademco vista 20p gets the new interface? I am using a Vista ICM. Link to comment Share on other sites More sharing options...
turls Posted October 15, 2015 Share Posted October 15, 2015 I’ll message the Security Team. I am not finding it either. It does require you to remove and re-add/re-configure the new driver once available. Please note that your firmware must be on 04.81 or greater. Matt Firmware is the likely issue. I didn't see that referenced anywhere and I'll have to dig up my docs to figure out what firmware level I'm on. Thanks. Link to comment Share on other sites More sharing options...
kajphotos Posted October 15, 2015 Author Share Posted October 15, 2015 shairbridge is available inside composer 2.8.0.MattI have 2.8 installed and also have a hc800 but still didn't see some of the new features but I believe Pandora and shairbridge has to be add in buy a dealer !! As per chow They are only native on new projects Link to comment Share on other sites More sharing options...
Matt Posted October 15, 2015 Share Posted October 15, 2015 Does the Ademco vista 20p gets the new interface? I am using a Vista ICM.Yes the Honeywell Vista (15-21, not 128/256) will have the updated UI if you're using the newer drivers. Matt Link to comment Share on other sites More sharing options...
Matt Posted October 15, 2015 Share Posted October 15, 2015 I have 2.8 installed and also have a hc800 but still didn't see some of the new features but I believe Pandora and shairbridge has to be add in buy a dealer !! As per chowThey are only native on new projectsThat's correct. If you want the new drivers those drivers must be added into your project. Matt Link to comment Share on other sites More sharing options...
turls Posted October 15, 2015 Share Posted October 15, 2015 I’ll message the Security Team. I am not finding it either. It does require you to remove and re-add/re-configure the new driver once available. Please note that your firmware must be on 04.81 or greater. Matt Ok, no luck finding out how to determine firmware levels on my Concord (it was installed in 2011). But I can't even find an online driver for Concord (tried Interlogix also) using search. So I'm not sure what the issue might be there. Link to comment Share on other sites More sharing options...
mallom Posted October 15, 2015 Share Posted October 15, 2015 Yes the Honeywell Vista (15-21, not 128/256) will have the updated UI if you're using the newer drivers. MattAny information about the DSC IT-100? Thanks! Link to comment Share on other sites More sharing options...
Matt Posted October 15, 2015 Share Posted October 15, 2015 Any information about the DSC IT-100? Thanks!The updated DSC PowerSeries (IT-100 Serial) driver is being written by a third party developer. I believe Paul @Domosapiens is working on the driver. I don't see it available yet on https://www.houselogix.com/shop/domosapiens - so I am sure he'll post it once it's complete. Matt Link to comment Share on other sites More sharing options...
South Africa C4 user Posted October 15, 2015 Share Posted October 15, 2015 Will the new security interface work with DSC? Will My dealer need to reinstall a DSC driver or will it just work after updating to 2.8? Link to comment Share on other sites More sharing options...
Matt Posted October 15, 2015 Share Posted October 15, 2015 Will the new security interface work with DSC? Will My dealer need to reinstall a DSC driver or will it just work after updating to 2.8?The new security proxy requires new drivers. Yes, your dealer will need to remove and add in the new driver to get the new security interface. Matt Link to comment Share on other sites More sharing options...
South Africa C4 user Posted October 15, 2015 Share Posted October 15, 2015 Thanks Matt Link to comment Share on other sites More sharing options...
Gene Posted October 15, 2015 Share Posted October 15, 2015 The new security proxy requires new drivers. Yes, your dealer will need to remove and add in the new driver to get the new security interface. Matt Are the drivers available in 2.8 already? I have a concord4... just want to be prepared when I upgrade. Link to comment Share on other sites More sharing options...
howieumd Posted October 15, 2015 Share Posted October 15, 2015 I’ll message the Security Team. I am not finding it either. It does require you to remove and re-add/re-configure the new driver once available. Please note that your firmware must be on 04.81 or greater. Matt Hi Matt..do you have any idea on how to check firmware on the Concord 4? I can't find how to do it online anywhere. Thx! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.