brucecampbell Posted September 4, 2015 Share Posted September 4, 2015 I picked up a htc to use the additional ir outs and contact. It's on v1.7.4My hc800 and hc300 are v2.5.2In order to use the htc do I need to get it upgraded to the latest version or is that only relevant if it was to be used as director and/or navigator?Any advice would be great thanks. Link to comment Share on other sites More sharing options...
msgreenf Posted September 4, 2015 Share Posted September 4, 2015 Htc is pretty dead hardware. It can't run 2.5.2Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
brucecampbell Posted September 4, 2015 Author Share Posted September 4, 2015 I realise it's pretty dead and not supported with the latest. I se it can update to 2.3 but do I need to update it at all to use it??I still run an old mini touch screen and have no intention on moving up from 2.5 for now. Link to comment Share on other sites More sharing options...
thecodeman Posted September 4, 2015 Share Posted September 4, 2015 It should be able to continue to work as a slave on 2.5.2. You'll want to ID it into the project and run update manager to make sure its on the latest version it can run. It will probably update to 2.3 as i think thats the last firmware for it, but it should work in 2.5.2 as a slave for IR, etc. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.