Wiseman Posted June 1, 2015 Share Posted June 1, 2015 Hello, If any of the members here have integrated dynalite, then kindly reply to this thread. I need some assistance . Thanks in advance. Link to comment Share on other sites More sharing options...
sdgould Posted June 1, 2015 Share Posted June 1, 2015 can possibly assist Link to comment Share on other sites More sharing options...
Wiseman Posted June 2, 2015 Author Share Posted June 2, 2015 can possibly assistSo, when I add the area preset driver, I want to send the command to the Envision program ( a dummy command) with the area number. How do I do this? When I tried changing area in the properties page it doesn't show up on the EV program. It sometimes says area 1 ramp up light, or area 3 ramp up light. How do I fix this. Link to comment Share on other sites More sharing options...
Dig82 Posted February 14, 2016 Share Posted February 14, 2016 hi im new here and after i search found this thread about dynalite ,if any of you guys had experienced c4 with dynalite ethernet adapter dmng100bt ,how did u connect to it ? im seein it in the network but in the lua debug i see it can't connect to the adapter ,it says i should connect through port 8008 but the same dynalite adapter is used for remote dynalite programming via different port , can it be used in both ports - for the remote programing of dynalite and for c4 control ? thank in advance D Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.