satcomtim Posted December 7, 2007 Share Posted December 7, 2007 I have a Wifi Mini Touch Screen and a table top kit. I can not get the MTS to fit in the box, it looks like the weights need to be removed to allow it to fit. Anybody have any experience with this?Thanks,TimP.S. I just completed the Tech 1 dealer training and my company is now a Control4 dealer. Trying to get the show room set up. Link to comment Share on other sites More sharing options...
Paul_Quadriom Posted December 7, 2007 Share Posted December 7, 2007 I have a MTS with a table top kit and it fits ok, the wires were stopping it from closing at first but with a little patience, you'll get it to close. If you can, add more weight to it cos it'll move around when you try to use it if you dont. (and make it look and feel like it's not just an empty plastic shell. Link to comment Share on other sites More sharing options...
satcomtim Posted December 7, 2007 Author Share Posted December 7, 2007 Thanks Paul, I am still playing with it. I currently have a box with no wires and the back brace removed. The problem is that the power supply that extrudes from the MTS is hitting the weights and will not allow the MTS to sit flush. I can install it upside down and it fits fine. The table top kit I have does not match the picture in the instructions. I'll keep playing... Link to comment Share on other sites More sharing options...
satcomtim Posted December 7, 2007 Author Share Posted December 7, 2007 Ok I got it to fit. I had to remove and relocate the top weight (on the stack of 3 weights). I had to do this on both my table top kits. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.