Ajbarrister Posted March 24, 2013 Share Posted March 24, 2013 Here is the set up in our master bedroom. A Samsung TV on the wall and a Apple TV II directly into the HDMI input on the TV controlled via IR. Other video and audio sources are controlled by a Sony video matrix switch and Control4 audio matrix switch in basement into the TV's Component Input via a Sony Balun. So when my wife has Cable Box 1 as the video source the sound is played over speakers in the ceiling. Of course when she switches to the Apple TV the audio source from the cable box continues to play over the speakers in the ceiling and the audio from the Apple TV plays over the TV's speakers. I tried via programing to correct this but it doesn't work. Just trying to figure out what I am doing wrong.In Programming:Master BedroomRoom Level When video source changesIf video source is Apple TV Set Current Room Volume to 0Didn't workMaster BedroomRoom Level When video source changesIf Apple TV is onSet Current Room Volume to 0Didn't workMaster BedroomRoom Level When video source changesIf video source is Apple TV or If Apple TV is onDisconnect Amp output 7 (thats the master bedroom)Didn't workI am not very good with variables so if it has to be done that way please be specific. Thank you. Link to comment Share on other sites More sharing options...
Godzilla Posted March 24, 2013 Share Posted March 24, 2013 you can set up your TV as video audio endpoint 2 and video volume 2, the system should recognize the apple is connected directly to your tv Link to comment Share on other sites More sharing options...
Ajbarrister Posted March 25, 2013 Author Share Posted March 25, 2013 Thank you Godzilla for taking the time to speak with me over the phone and walking me through this!!!!!! Link to comment Share on other sites More sharing options...
Godzilla Posted March 25, 2013 Share Posted March 25, 2013 was my good deed for the day.......glad its working Link to comment Share on other sites More sharing options...
vitali Posted October 14, 2014 Share Posted October 14, 2014 you can do better, run audio signal from TV audio output to C4 amp. In that case you will use you ceiling speakers in any case, Aplle TV, Smatr TV, anything.Audio signal you can run over cat-5 with balun or pair of RCA, even if you have 1 cat-5 and use it for internet you can split it for audio and internet. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.