Bibliscan Posted May 5, 2012 Share Posted May 5, 2012 Im trying to program my 6 button keypad so that when I hit button 6 that it will turn on the outside lamp and also turn the button green. Then when double tapped for it to turn off and turn the button color back to blue.The way I'm programming it is when button 6 tapped turn on light and change current 6 button color to green.When I try this on the actual keypad the button doesnt turn green but when I hit execute in composer it does. Why is it my working through composer and not physically?Also can anyone show me how to program so that when I press button 6 on the keypad it will turn th button green and turn the light on and when I hit the button again (just once) it will know if the lights on and turn off and change the button back to blue Link to comment Share on other sites More sharing options...
CFUG Posted May 5, 2012 Share Posted May 5, 2012 Do a toggle on the light at button 6. Then, program the light itself to react to a state-change. In the ON mode, go green on button 6. OFF mode, go blue (as in Meeechigan Wolverines) on button 6. Link to comment Share on other sites More sharing options...
Ramorous Posted May 6, 2012 Share Posted May 6, 2012 Have your dealer bind the button to the light itself and then you just program the colours within the driver. Once that's done, it's more responsive and faster. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.