ILoveC4 Posted April 23, 2012 Share Posted April 23, 2012 So, we now have Baldwin, Kwikset and Yale making C4 compatible locks...are there any others?Also, is there somewhere that one can go to see the available locks, styles, etc...from the different vendors? There aren't any on Control4's website, and it doesn't appear the lock manufacturers state on their website which are compatible and which aren't.Dan Link to comment Share on other sites More sharing options...
Matt Posted April 23, 2012 Share Posted April 23, 2012 Correct. Curretnly only B&D branded and Yale locks are supported. Here is Yale: http://www.control4.com/files/partners/Yale-Real-Living-Brochure.pdf or http://www.control4.com/residential/products/security/yale-deadbolt/(Currently only the deadbolts on the Yale Locks)Here is the Kwikset and Baldwin: http://www.control4.com/residential/products/security/kwikset-deadbolt/ (Supports deadbolts and Leverlocks) I hope this helps. Matt Link to comment Share on other sites More sharing options...
ILoveC4 Posted April 23, 2012 Author Share Posted April 23, 2012 Correct. Curretnly only B&D branded and Yale locks are supported. Here is Yale: http://www.control4.com/files/partners/Yale-Real-Living-Brochure.pdf or http://www.control4.com/residential/products/security/yale-deadbolt/(Currently only the deadbolts on the Yale Locks)Here is the Kwikset and Baldwin: http://www.control4.com/residential/products/security/kwikset-deadbolt/ (Supports deadbolts and Leverlocks) I hope this helps. MattThat is very helpful Matt, thank you!Just curious, is this information I should have been able to access without a direct link? I spent a few minutes looking, but came up empty. Link to comment Share on other sites More sharing options...
Matt Posted April 23, 2012 Share Posted April 23, 2012 You could have went to www.control4.com > Residential > Products > and Security Link to comment Share on other sites More sharing options...
ILoveC4 Posted April 23, 2012 Author Share Posted April 23, 2012 Doh...now I find them under Security.I guess it was too early when I was looking this morning...my mistake.Thanks!EDIT: And then we posted at the same time =) Link to comment Share on other sites More sharing options...
ILoveC4 Posted April 23, 2012 Author Share Posted April 23, 2012 Another question...I've seen the Yale lock and it is nice. That is probably the route I will take. I'm only hesitant because they don't have a matching handleset available (that I can see) and I am doubtful that the finish will be an exact match. The various "bronze" products have extreme variation. Even "oil rubbed bronze" varies from manufacturer to manufacturer, not counting the "distressed" or "aged" or "venetian rubbed".At any rate, what I am getting at, is has anyone seen the Baldwin lock? I'm curious if the buttons are hard plastic or soft rubber like the Kwikset? I have 3 Kwikset locks on other exterior doors now, but those aren't suitable for the front door. I may get the Baldwin lock WITHOUT the keypad, but if the buttons are a hard plastic I may consider that.I wish the Yale had a matching handleset. Link to comment Share on other sites More sharing options...
CFUG Posted April 23, 2012 Share Posted April 23, 2012 At any rate, what I am getting at, is has anyone seen the Baldwin lock? .\You mean this-http://control4.com/residential/products/security/baldwin/Again, on the C4 website Link to comment Share on other sites More sharing options...
Matt Posted April 23, 2012 Share Posted April 23, 2012 Here is a picture of the Baldwin deadbolt, which I have. This should answers your questions. Let me know if it doesn't.Matt Link to comment Share on other sites More sharing options...
kevvo Posted April 23, 2012 Share Posted April 23, 2012 I have the Baldwin and 2 Kwiksets. I got the Kwiksets a while back and use them on a side door and garage entrance door. I wasn't too thrilled about the quality or buttons on them. I initially had reservations going with Baldwin thinking that they are going to be like the Kwiksets but it is actually a far superior product. Internally they are identical though. But on the outside, the buttons are hard plastic and the entire assembly just feels heavier and sturdier. Overall, I'm glad I went with the Baldwin for the front door. Also keep in mind that the Baldwins use a C-keyway (Schlage) while the Kwiksets use the K-keyway, in case you are thinking about creating a master key. Link to comment Share on other sites More sharing options...
Matt Posted April 23, 2012 Share Posted April 23, 2012 The whole “venetian” bronzed / rubbed (however you want to call or name it) – is hard to match. I personally switched from the venetian look to nickel since there is not a standard and it is difficult to match. Matt Link to comment Share on other sites More sharing options...
ILoveC4 Posted April 23, 2012 Author Share Posted April 23, 2012 I have the Baldwin and 2 Kwiksets. I got the Kwiksets a while back and use them on a side door and garage entrance door. I wasn't too thrilled about the quality or buttons on them. I initially had reservations going with Baldwin thinking that they are going to be like the Kwiksets but it is actually a far superior product. Internally they are identical though. But on the outside, the buttons are hard plastic and the entire assembly just feels heavier and sturdier. Overall, I'm glad I went with the Baldwin for the front door. Also keep in mind that the Baldwins use a C-keyway (Schlage) while the Kwiksets use the K-keyway, in case you are thinking about creating a master key.Thanks Kevvo. Yes guys, I could see pictures, but it is hard to tell from the pictures if the buttons are rubber with glossy paint (that will most certainly crack and flake off in short order) or if they're hard plastic, similar to the Yale.Kevvo, are you saying that I can't have one key that will operate both a Kwikset and a Baldwin lock? I'm unfamiliar with C-keyway vs. K-keyway...but I can always look it up.Thanks guys. Link to comment Share on other sites More sharing options...
kevvo Posted April 23, 2012 Share Posted April 23, 2012 Yup. Those 2 keyways aren't compatible with each other. Link to comment Share on other sites More sharing options...
kevvo Posted April 23, 2012 Share Posted April 23, 2012 You can order the Yales in either keyway though. Link to comment Share on other sites More sharing options...
SY3 Posted April 23, 2012 Share Posted April 23, 2012 I know this is a newbie question but just for my own piece of mind, all these locks are only available in 1.8+, correct? Are there any locks that work in 1.7.4? Link to comment Share on other sites More sharing options...
RyanE Posted April 23, 2012 Share Posted April 23, 2012 There are no 'embernet' door locks.All ZigBee door locks run on ZigBee Pro, and require at least Control4 OS version 1.8.RyanE Link to comment Share on other sites More sharing options...
RyanE Posted April 23, 2012 Share Posted April 23, 2012 And most run best on 2.2+, since then you'd have the apps available to manage user codes, etc., especially on the Yale locks.RyanE Link to comment Share on other sites More sharing options...
bk Posted April 23, 2012 Share Posted April 23, 2012 If you are in a position to, (building or renovating) hard wiring locks opens your possibilities up enormously, then there is also no need for battery replacements.Just to throw in another option! Link to comment Share on other sites More sharing options...
ILoveC4 Posted April 23, 2012 Author Share Posted April 23, 2012 The whole “venetian” bronzed / rubbed (however you want to call or name it) – is hard to match. I personally switched from the venetian look to nickel since there is not a standard and it is difficult to match. MattYeah, unfortunately that isn't realistic for me. We're talking hinges, knobs, light fixtures, faucets, etc....it would be BEYOND expensive. Link to comment Share on other sites More sharing options...
scatt Posted April 24, 2012 Share Posted April 24, 2012 Dan.... I've Been Waiting for the Yale "Lever Locks" also. They have pictures of them, but nothing in Person Yet. I emailed/Facebooked them, and here is the Response I got...... I'm waiting for them. They are Exactly what I need!!To: Yale Real Living April 17 at 10:34am · ..Any Release date on the Yale Touchscreen With the Lever? I need a few in Zigbee.From: Yale Real Living Hey Tom. It's looking like July.From: Tom You guys are killing me.... First it was March, then May, now July!! Link to comment Share on other sites More sharing options...
ILoveC4 Posted April 24, 2012 Author Share Posted April 24, 2012 Dan.... I've Been Waiting for the Yale "Lever Locks" also. They have pictures of them, but nothing in Person Yet. I emailed/Facebooked them, and here is the Response I got...... I'm waiting for them. They are Exactly what I need!!To: Yale Real Living April 17 at 10:34am · ..Any Release date on the Yale Touchscreen With the Lever? I need a few in Zigbee.From: Yale Real Living Hey Tom. It's looking like July.From: Tom You guys are killing me.... First it was March, then May, now July!!That's frustrating. I'm not looking for one with the level, looking for a big handleset that is appropriate for the main entry door on the front of the house.Hopefully they get that released soon though...I'm not patient and that wait would be killing me! Link to comment Share on other sites More sharing options...
Bud Posted April 25, 2012 Share Posted April 25, 2012 Dan,I also have both Kwickset deadbolts and levers as well as the Baldwin versions for the main entry. The Baldwin is more expensive but definitely a big step up in quality. It feels almost twice as heavy. Even the latch deadbolt assembly is of much higher quality. I had the same issues with looking for a handleset for the front door. I wound up going with the Baldwin Boulder 3/4 eschuteon handleset without the keypad and one 3/4 dummy on my double doors on the front. From the outside it looks like a normal double handleset without any keypad but has the backside of the lock inside of the active panel. (That is one of the reasons why I was working on a remote keyless entry.) I have the regular Boulder with the keypad on the Mud Room door for our routine use. The Yale locks look cool and seem to have a nice app but the appearance did not work IMO and more importantly for the wife. I have just moved in the house and so I can't give a very good review on using them long. The front door lock has not been use yet since the front doors still need to be adjusted and have weatherstripping added. (Thats what I get for getting custom made wood doors probably should have gotten factory units.) Anyway when I odrered them the dealer came back with the same price for the deadbolt with the keypad and for the one without the keypad that just had the backside. So I just ordered two both full locks with the keypad. I can't explain that one. I called Baldwin and they told me they were the same just one did not come with the keypad. Anyway one of the keypads did not work, I though I was OK but the second one now has a button that does not work so I will need to RMA one. As an aside. I have the Kwikset levers on some interior doors and on the garage, pool bath etc. For the inside we wanted brushed nickel but did not particularly like the wave handle. It turns out the handles are interchangable. This is not advertised or in the instructions but I found out from experiminentation. We changed the levers for Kwikset Ashfield which I used in the house and are really happy with them. (To do this use the handles from an entry set as they are longer than the handles from passage sets, I can't remember if the privacy levers worked. I swapped the ones I had inside attic doors etc to use the Ashfield levers inside.) Link to comment Share on other sites More sharing options...
ILoveC4 Posted April 25, 2012 Author Share Posted April 25, 2012 Thanks Bud. Would you mind taking some pictures of your Baldwin lock without the keypad? I think that's the route I'm going to take.I have 3 exterior doors with the Kwikset zigbee locks now and they work well, but like I said they won't fly for the front door =) I'd love to see some pictures of yours, if you don't mind. Link to comment Share on other sites More sharing options...
Bud Posted April 25, 2012 Share Posted April 25, 2012 sure front door inside side door Link to comment Share on other sites More sharing options...
ILoveC4 Posted April 25, 2012 Author Share Posted April 25, 2012 sure front door inside side door****** need some help tried several times can't get images or attachment to work....Upload them to photobucket. Link to comment Share on other sites More sharing options...
Bud Posted April 25, 2012 Share Posted April 25, 2012 sure front door inside side doorOK finally got them up. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.