mattie Posted February 17, 2011 Share Posted February 17, 2011 My installer is telling me that a C4 driver for my DSC Powerseries PC1616 security system doesn't exist and therefore cannot be integrated. True? Link to comment Share on other sites More sharing options...
CFUG Posted February 17, 2011 Share Posted February 17, 2011 Offhand, I'd say he's full of shit but I'm not a professional installer....http://www.dsc.com/index.php?n=products&o=view&id=22 Link to comment Share on other sites More sharing options...
CFUG Posted February 17, 2011 Share Posted February 17, 2011 On the other hand, if he is familiar with the existing C4 driver and is telling you certain features won't show, then that's another problem. But, I find it hard to believe that DSC would have such diverse features that would not be covered under the exisiting PowerSeries driver. Link to comment Share on other sites More sharing options...
chesterwilson Posted February 17, 2011 Share Posted February 17, 2011 Works great with my pc5010 dsc model. I used IloveC4's advice and plugged the module straight into my controller's rs232 port. Link to comment Share on other sites More sharing options...
c4pa Posted February 17, 2011 Share Posted February 17, 2011 if you search here you'll find a post from RyanE stating that there is a driver for all PowerSeries panels. It has a universal name for the driver. found it:The protocol command set is the SAME for all of those panels.As long as he's using the IT-100 module and the driver for the 832 (IT-100 version), it should work fine.As a matter of fact, in the upcoming release of 1.3.2, the driver will be called the 'DSC PCxxx and Powerxxxx IT-100' driver, for this very reason.RyanEI agree, your dealer didn't do his research. Link to comment Share on other sites More sharing options...
RyanE Posted February 18, 2011 Share Posted February 18, 2011 Wow, "Upcoming 1.3.2 release". Been a while.RyanE Link to comment Share on other sites More sharing options...
WaarrEagle Posted April 29, 2013 Share Posted April 29, 2013 I hate to dig up such an old thread, but I am looking to integrate my DSC security system with Control4. I know the IT-100 will do the job, but I am wondering if the Envisalink product would work as well: http://www.eyezon.com/?page_id=176It provides ethernet connectivity instead of serial cable. Does anyone know if this could be integrated into Control4? Link to comment Share on other sites More sharing options...
dogdvr Posted April 30, 2013 Share Posted April 30, 2013 Control4 does not have an ip driver just the serial one Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.